The Topline 5 Sleeptimer
Your Topline 5 remote comes with an internal Sleeptimer function for those
devices (TV or Satellite) which did not come standard with this function. To
use the Topline 5’s Sleeptimer:
Making your Topline ready for Sleeptimer:
Press and hold MAGIC until the display reads [TIMED
SEQ].
Press the MENU- key twice until the display changes to
[CONFIGURE]. Press ENTER and the display will change to
[TIME SETUP].
Press the MENU+ key four times until the display
changes to [SLEEP LOCK]. Press ENTER and the display will
read [DISABLE].
Press MENU- one time to change the display to [ENABLE]
then press ENTER to return to the main screen. It is only
necessary to perform steps 1-4 once. Now to set the timer,
continue will the steps below.
Setting the Topline 5’s Sleeptimer:
It is possible to set the timer for 15, 30, 45 or 60 minutes. To do this, first
make sure your TV (or Satellite) is switched on. Then,
Press SHIFT and then POWER. The display will read [SLEEP
15]. To increase the timer, use the MENU+ key.
Once you have set the timer to the desired time, press
ENTER. The display will read [SLEEP and the time]. Now
set the Topline 5 remote down, pointing it at your device.
When the programmed amount of time has elapsed, the
Topline 5 will send the command for Power, hence
turning off your device.
22
Advanced Functions
2
3
4
1
1
2
Notes:
- To deactivate the Sleeptimer, press Power on the Topline 5.
- Also, it is only necessary to follow steps 1-2 above one time. For
subsequent use of the Sleeptimer, simply begin with “Setting the
Sleeptimer”.
- Remember, when using the Topline 5’s Sleeptimer, you must set the
remote so it is pointing at your device.
