Bedienungsanleitung Onkyo BD-SP809S (Seite 44 von 56) (Englisch)

577596

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

D Note

• You can select “Source Direct” or “Auto” by pressing

[SOURCE DIRECT] on the front panel.

• You can also change the resolution of the video signal

being output from the HDMI OUT jack by pressing

[RESOLUTION] repeatedly.

• Pressing [RESOLUTION] does not work when

HDMI cable is not connected, or when no video signal

is being output from the HDMI OUT jack.

• Pressing [RESOLUTION] does not work during the

playback of a BD-video or AVCHD.

• The selected resolution must also be supported by

your display device.

• If your TV and the unit is connected by a DVI

cable and if you select “Auto” or “Source Direct”,

“480p/576p” will be automatically in effect.

• Even if “Video Resolution” is set to “1080p/24”, for a

Blu-ray Disc™ that is not recorded in 1080p/24 or for

DVD, the video resolution supported by the disc and

the display device will be output instead of 1080p/24.

• Refer also to your TV’s manual.

• When the HDMI OUT jack is outputting the video in

1080p/24 or 3D, picture will not be output from the

VIDEO OUTPUT jacks.

• Do not remove HDMI cable during playing the video

in 1080p/24 or 3D. Video signals will not be output if

you replace the connection to a device which is not

compatible with 1080p/24 or 3D contents.

• When connected to an HDCP incompatible display

device, the picture will not be displayed properly.

• The audio signals from the HDMI OUT jack (including

the sampling frequency, the number of channels and

bit length) may be limited by the connected device.

• Among the display device(s) that support HDMI,

some do not support audio output (for example,

projectors). While connected to a device such as a

projector, audio will not be output from the HDMI

OUT jack.

• When this unit’s HDMI OUT jack is connected

to a DVI-D compatible display device(s) (HDCP

compatible) with an HDMI-DVI converter cable, the

signals are output in digital RGB.

• When you make a selection, the TV monitor

temporarily goes blank and then comes back again.

If it does not come back, press [RESOLUTION]

repeatedly to change the resolution or touch and

hold [B (play)] on the front panel for 5 seconds to

change the setting back to its default.

• When playing back a Frame Sequential 3D Disc, video

resolution of output picture will depend on contents

on the disc. (“Video Resolution” setting is not

applicable for Frame Sequential 3D Discs.)

To play back the digital video images of a BD-video or

DVD-video via an HDMI connection, it is necessary that

both the player and the display device (or an AV receiver

/ amplifier) support a copyright protection system called

HDCP (high-bandwidth digital content protection system).

HDCP is copy protection technology that comprises data

encryption and authentication of the connected AV device.

This unit supports HDCP. Please read the operating

instructions of your display device (or an AV receiver /

amplifier) for more information.

11.5 Parental

Rating’s control allows you to set a limit, which prevents

your children from viewing inappropriate materials. Playback

will be stopped if the rating’s exceed the level you set, and it

will require you to enter a password before playing back the

disc.

1. Use [the Number buttons] to enter your 4-digit

password.

For first time use:

Use [the Number buttons] to enter any 4-digit

number (except for 4737). That number will be used

as the recover password. Record your password, in

case you might forget it.

• If you forget the password, enter [4], [7], [3],

[7]. The password will be cleared and rating level

will be set to “Off”.

• When you input the password, select “Clear” to

clear the number, then re-enter the password.

■ BD Rating Level

[HOME ] → “Settings” → “Playback” → “BD Rating Level”

1. Use [Î / ï / Í / Æ] to select “Settings” in the home menu,

then press [ENTER].

2. Use [Î / ï] to select “Playback”, then press

[ENTER].

3. Use [Î / ï] to select “BD Rating Level”, then press

[ENTER].

4. Use [the Number buttons] to enter your 4-digit

password.

5. Use [Î / ï] to select your desired option, then press

[ENTER].

“Off” : To release the limitation.

“Age Setting” : To set the age limitation.

• After selecting “Age Setting”, use

[the Number buttons] to enter the age.

(e.g., For age 6, enter [6] +

[

ENTER

]

For age 15, enter [1], [5] +

[

ENTER

]

6. Press [HOME

] to exit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP809S Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo BD-SP809S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info