Bedienungsanleitung Onkyo CS-245DAB (Seite 32 von 40) (Englisch)

492680

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

En-32

Using the Timer

The CD receiver has a programmable timer for

automated playback, and a sleep timer for turning the

CD receiver off after a specified period.

You can also use the alarm playback function of your

iPod/iPhone to initiate timer playback on the CD

receiver.

The timer can be used to start FM/DAB, CD, iPod/USB,

or LINE playback at a specified time. You could, for

example, use a timer to turn on the CD receiver every

morning, just like a radio alarm clock.

Note:

• If iPod is selected as the input source for the timer

settings, USB will play if only a USB flash drive is

connected, and iPod/iPhone will play if an iPod/

iPhone is connected.

Notes:

• You must set the clock before you can program the

timer.

• If you don’t operate any buttons for 5 seconds while

programming a timer, the procedure will be cancelled

and the previous display will reappear.

• When the CD receiver is turned on by the timer,

playback will begin with the most recently received

station in the case of FM/DAB, the first song in the

case of a CD or iPod (USB), and the current state of

the connected device in the case of LINE.

• Only one timer can be set.

Prepare the source that you want the timer

to play.

If you want FM/DAB to play, tune to the station

you want to hear.

If you want a CD to play, insert the disc.

For an iPod/iPhone, place it in the dock. If you’re

using a USB flash drive rather than an iPod/iPhone,

disconnect the iPod/iPhone from the iPod dock

(see page 30).

If you want to play a device connected to LINE,

make settings on the connected device so that it

will start playing when the timer operates.

Press the [TIMER] button repeatedly until

“Timer XX” appears.

“XX” indicates the source that was last selected for

timer playback.

Use the arrow []/[] buttons to select the

source, and then press [ENTER].

You can select the following sources:

CD, iPod (USB), FM/DAB, LINE.

In the display, “TIMER” and a number indication

will blink according to the input source you’ve

selected.

The number will be “1” for FM/DAB, “2” for CD,

“3” for iPod (USB), and “4” for LINE.

Use the arrow []/[] buttons to specify the

“hour” at which you want the timer to play,

and then press [ENTER].

Use the arrow []/[] buttons to specify the

“minute” at which you want to timer to play,

and then press [ENTER].

Use the arrow []/[] buttons to select

“Timer On,” and then press the [ENTER]

button.

When a timer is turned on, its TIMER and number

appears on the display.

If there is no operation for several seconds, the

setting will be made with the currently-shown

content.

The display will return to its previous state except

for “TIMER” and the number of the selected input

source; the timer is now set.

Press the [ ON/STANDBY] button or the

remote controller’s [] button to set the CD

receiver to Standby.

Programming the Timer

ENTER

TIMER

DISPLAY

Tim„„er„„ F„„M„„ „„

Tim„„er„„--„„:„„--„„

Tim„„er„„ 6„„:„„00„„

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo CS-245DAB Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo CS-245DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info