Bedienungsanleitung Onkyo CS-245DAB (Seite 33 von 40) (Englisch)

492680

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

En-33

Using the Timer—Continued

Tips:

• If you decide to cancel during this procedure without

making timer settings, press the [TIMER] button.

• By pressing the [DISPLAY] button when specifying

the time, you can switch between 12-hour and 24-hour

displays.

Notes:

• Be sure to set the CD receiver to Standby, otherwise

the timed operation will not work.

If the timer has been set, timed operation will work

even if the SLEEP timer caused the CD receiver to

enter Standby mode.

Once the timer has been turned on, playback will start

at the same time every day. Be sure to turn off the

timer before leaving on vacation.

• If the timer turns the power on, the “SLEEP”

indication will light. If no operation is performed for

one hour, the CD receiver will automatically enter

Standby mode. If you perform any operation, the

“SLEEP” indication will turn off, and the CD receiver

will continue operating.

Once a timer has been programmed, you can turn it on or

off as necessary. For example, while you’re on holiday,

you may want to turn off the timer you use as an early

morning alarm.

Press the [TIMER] button repeatedly until

“Timer On” or “Timer Off” appears.

Use the arrow []/[] buttons to select

either “Timer On” (set) or “Timer Off”

(cancel), and then press the [ENTER]

button.

If there is no operation for several seconds, the

setting will be made with the currently-shown

content, and the display will return to its previous

state.

If you specify Timer On (set), the “TIMER”

indication and the number of the selected input

source will light.

If you select Timer Off (i.e., turn off the timer), the

“TIMER” indicator will disappear.

With the sleep timer, you can set the CD receiver so that

it automatically turns off after a specified period.

Press the [SLEEP] button repeatedly to select

the required sleep time.

With the [SLEEP] button, you can set the sleep time

from 90 to 10 minutes in 10 minute steps.

When the sleep timer has been set, the SLEEP indicator

appears on the display. The sleep time appears on the

display for about 3 seconds, then the previous display

reappears.

Checking the Remaining Sleep Time

To check the remaining sleep time, press the [SLEEP]

button.

Note that if you press the [SLEEP] button while the sleep

time is being displayed, you’ll shorten the sleep time by

10 minutes.

For example if you press the [SLEEP] button and the

remaining time is shown as 55 minutes, pressing the

[SLEEP] button once again will shorten this time to 50,

and each subsequent press will shorten the time in 10

minute increments.

Canceling the Sleep Timer

To cancel the sleep timer, press the [SLEEP] button

repeatedly until “Sleep Off” appears.

Note:

• If the timer turns the power on, the “SLEEP”

indication will light. If you perform any operation, the

“SLEEP” indication will turn off. If you want to set

the SLEEP timer, you’ll need to make the setting again

after the “SLEEP” indication turns off.

Turning Timer On and Off

SLEEP

TIMER

Using the Sleep Timer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo CS-245DAB Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo CS-245DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info