371103

Onkyo dr l 50 Seite 71

71
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
71
—
—
—
—
Video1
Language
General
V2
Exit
Move
TV Screen
Component Video
S-Video Out
Screen Saver
16:9(Wide)
S1
S2
On
SETUP
Settings: S1
S2 (Factory Setting)
■ Turning the Screen Saver On and Off
Expert
As a protective function against residual images on the TV
screen or monitor, a phenomenon referred to as “screen burn”,
the screen saver appears when the same screen has been
displayed for a length of time. By default, the screen saver is
turned on. However, the screen saver function can be turned
on and off at your discretion.
Make changes to the [Screen Saver] setting in the Setup
screen Video 1 menu in the [Expert] menu mode (page 69).
—
—
—
Video1
Language
General
V2
Exit
Move
TV Screen
Component Video
S-Video Out
Screen Saver
16:9(Wide)
Interlace
S2
On
Off
SETUP
Settings: On (Factory setting)
Off
■ Switching the S-Video Output
Expert
You can switch the kind of S-Video signal output from the S-
Video outputs. If you connected your TV with an S-Video cord,
in rare cases the TV picture may appear stretched. In this
case switch the output from [S2] to [S1].
Make changes in the [S-Video Out] in the Setup screen Video
1 menu in the [Expert] menu mode (page 69).
Setting the Video 1 Options
■
Connecting to a progressive scan-
compatible TV (Other than European model)
Compared to a standard interlaced TV picture, a progressive
scan TV is capable of stable, flicker-free images.
Set only if you connected the COMPONENT VIDEO OUT
jacks to a progressive scan-compatible TV or monitor.
Make changes to the [Component Video] setting in the Setup
screen Video 1 menu.
Settings: Interlace (Factory Setting)
Use this setting with regular TVs that are not
compatible with progressive scan. Check the TV’s
instruction manual if you are not sure about this.
Progressive
Use this setting with TVs and monitors that have
progressive scan component video inputs. The
PRGV indicator lights up. Check the TV’s
instruction manual if you are not sure about this.
■ Setting the Video Output Format for the AV
CONNECTOR (European models)
When connections are made to the AV CONNECTOR jack on
the DVD receiver via a SCART cable, it is possible to select
the video format that is compatible with your TV or monitor.
Select [Video] to have a composite video signal output, [S-
Video] to have an S-video signal output, and [RGB] to have an
RGB signal output. For more information on which format is
most appropriate, refer to the instructions supplied with your
TV or monitor.
Make changes to the [Video Out] setting in the Setup screen
Video 1 menu.
Settings: Video (Factory setting)
S-Video
RGB
Example (Other than European model)
Example (Other than European model)
Auto Progressive
Switches to progressive scan when 16:9 DVDs are
played,4:3 DVDs uses interlace setting. Your TV/
monitor must be compatible with progressive scan
to use this setting.
Tip
If this DVD Receiver is set to output progressive-scan video, it’s
possible that the picture will appear stretched when playing discs
recorded in 4:3 format. This happens when the TV’s aspect ratio is
set at 16:9. To see the picture in its correct aspect ratio, change the
TV setting to 4:3.
If your TV can not be switched between 4:3 and 16:9, set this DVD
Receiver to [Interlace] or [Auto Progressive]. In Auto progressive
mode, 4:3 discs will be played in Interlace mode, while discs that are
recorded in both 4:3 and 16:9 will play in interlace mode during the
4:3 sections, and in progressive mode during the 16:9 parts. Switch
your TV’s aspect ratio to the most suitable setting (for more details,
see the manual that came with your TV). When set to [Auto
progressive], you may see picture disturbance when this DVD
receiver (and the TV) switches between progressive and interlace
modes. This is not a malfunction of either this DVD receiver or the
TV. Picture disturbance should only occur when switching from a
menu screen to the main feature, for example.
Notes
• If you connect a TV that is not compatible with a progressive scan
signal and choose one of the progressive scan settings, you will
not be able to see any picture at all. With your TV connected
using either the composite or S-Video terminals, choose the
[Interlace] setting in the [Component Video] menu.
*
Expert
denotes more detailed settings. If the item is not displayed,
please refer to page 69 to display it.
—
—
—
Video1
Language
General
V2
Exit
Move
TV Screen
Component Video
S-Video Out
Screen Saver
16:9(Wide)
Interlace
S2
On
Off
SETUP
—
Video1
Language
General
V2
Exit
Move
TV Screen
Component Video
16:9(Wide
)
Interlace
Progressive
Auto Progressive
Select Interlace or Progressive
output Component Video
SETUP
—
—
Video1
Language
General
V2
Exit
Move
TV Screen
Video Out
16:9(Wide
)
Video
S-Video
RGB
Set AV CONNECTOR video format
SETUP
Theater-Dimensional
PROGRESSIVE SCAN
IPM
PROGRESSIVE indicator
… 71 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo dr l 50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info