Bedienungsanleitung Onkyo dr l 50 (Seite 72 von 88) (Englisch)

371103

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Customizing the Function Settings

■ Adjusting the picture quality settings

– To create your own setting (1)

1 Use the cursor button (3) to select [Start] then press

ENTER.

Interlace Video Memory Select

Interlace Video Setup

2 Use the cursor button (∞) to select [Video Setup] then

press ENTER.

3 Use the cursor buttons (2/3) to select the setting to [On] or

[Off].

DNR

Move

Select

Check

DISPLAY

ENTER

off max

4 Use the cursor buttons (5/∞) to select the setting to adjust.

You can adjust any or all of the following picture quality factors:

<Other than European model when set to [Progressive] or

[Auto Progressive] in the Setup screen Video 1 menu.>

DNR

Controls the amount of signal noise in the luminance component

of the video signal.

Sharpness

Adjusts the sharpness of the mid-frequency (less detailed)

elements in the picture. (This setting is only effective when [Fine

Focus] is [On].)

Detail

Switch on to reveal greater detail (higher resolution) in the

picture.

Chroma Delay

Adjusts how saturated colours appear.

Gamma

Adjusts the brightness of the darker images in the picture.

Prog. Memory

Program the current settings.

You can either select a preprogrammed setting designed to

match certain program types or make adjustments to match

your own preferences and save them in the DVD receiver’s

memory.

Make changes to the [Video Adjust] setting in the Setup

screen Video 2 menu.

■ Selecting a preprogrammed setting

1 Use the cursor button (3) to select [Start] then press

ENTER.

Setting items vary depending on the settings in the Setup

screen Video 1 menu.

—

Video2

Language

General

Exit

Move

Background

Video Adjust

Gray

Start

Picture Quality Controls

SETUP

P.Memory 1

P.Memory 2

P.Memory 3

Cinema AnimationStandard

Interlace Video Memory Select

Interlace Video Setup

2 Press ENTER.

Standard (Factory Setting)

Presents the video with no effect added.

Cinema

Delivers a cinema-like picture.

Animation

Provides images with bright clear colors.

Memory 1, Memory 2, and Memory 3

(P.Memory 1, P.Memory 2, and P.Memory 3)

These are user programmable settings. See “Adjusting the

picture quality settings” on this page and page 73 for more

information.

3 Use the cursor buttons (2/3/5/∞) to select one of the

preprogrammed picture quality settings.

If there is a DVD or Video CD playing, the effects of each setting

can be viewed while it is highlighted on the screen. This may be

useful in selecting an appropriate setting.

4 Press ENTER.

The new selection is set.

Notes

• Each picture quality setting is defined by a number of individual

settings, described in “Adjusting the picture quality settings” on

this page and page 73.

• Depending on the disc and the TV/monitor, you may not see the

effect clearly.

Adjusting the Video Quality

Interlace Video Memory Select

Interlace Video Setup

Expert

denotes more detailed settings. If the item is not displayed, please refer to page 69 to display it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dr l 50 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info