136909
14
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
14
Connecting to an Amplifier
(To Enjoy the Sound Advantage of the DVD Player)
Before connecting
Refer to the instruction manual of the amplifier.
When you connect the DVD Player to the amplifier, be sure to turn off
the power and unplug both units from the mains before making any
connections. Otherwise, the speakers may be damaged.
Connect the plugs securely.
Notes
The remote controller supplied with Onkyo amplifier can be used
to operate the DVD player.
The function of the upper and lower z connectors are the same.
Connect to either one.
Connecting z cable only does not make the system operational.
You must also connect the audio cables as well.
For remote control operation, the audio connection cables must
also be connected.
Making a digital connection with the
amplifier
If your amplifier has a digital input jack, be sure to connect
it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack
on the DVD player.
Notes
DO NOT connect to the AC-3RF input (e.g. of a Dolby Digital
receiver) which is reserved only for video disc players.
Making the analog connection with the
amplifier
If your amplifier has no digital audio input, you can make
the analog connection. If the amplifier has a Dolby Pro
Logic decoder, you can reproduce the Dolby Pro Logic
surround sound.
An amplifier with a Dolby
Digital/DTS/MPEG1/MPEG2
decoder or 2 channel digital
stereo
Although you can reproduce the DVD Players sound from the TV speakers with the connections on the opposite page,
connecting with an amplifier provides you high quality dynamic sounds.
To reproduce Dolby Digital surround, MPEG1 audio, MPEG2 audio, and DTS surround sound, you need to connect to an
amplifier with a Dolby Digital, MPEG1 audio, MPEG2 audio, and DTS decoder respectively.
An amplifier with no
digital connection
: Signal flow
Optical fiber connection cable
To Digital optical jack
Incomplete
Insert completely
L
MONO
R
VIDEO OUTPUT
Y
P
B
P
R
COMPONENT
OPTICAL
COAXIAL
AC
INLET
REMOTE
CONTROL
ANALOG
OUTPUT
DIGITAL
OUTPUT
VIDEO
S VIDEO
MODEL NO.
DV
-
SP500
DVD
PLAYER
Stereo audio
connection cable
To audio input
Coaxial connection cable
To Digital coaxial jack
z cable
To z jack
z cable
To z jack
DO NOT connect the
mains lead at this time.
Be sure to set the digital output setting after
connection using the Setup Navigator explained in
Setting Up the Player starting on page 16 or the
function setting menu explained in Adjusting
Audio and Video Settings starting on page 38.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo dv sp 500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info