Bedienungsanleitung Onkyo dv sp 500 (Seite 38 von 60) (Englisch)

136909

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Use the cursor buttons (5/∞) to

select the setting you want to

change.

The options available for each setting

appear to the right when the setting is

selected. The current setting appears with

the setting indicator lit.

Example

Adjusting Audio and Video Settings

V2Video1

General

Language

Exit

Move

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Audio

—

Off

Dolby Digital

Off

96kHz 3 48kHz

MPEG 3 PCM

Setup audio

Digital output format/tone adjust

SETUP

Example

—

SETUP

ENTER

V2Video1

General

Language

Exit

Move

Select

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Audio

Off

Dolby Digital

Dolby Digital 3 PCM

96kHz 3 48kHz

MPEG 3 PCM

Change Dolby Digital output mode

Example

—

V2Video1

General

Language

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Audio

Off

Dolby Digital

Dolby Digital 3 PCM

96kHz 3 48kHz

MPEG 3 PCM

Output Dolby Digital

SETUP

ENTER

Exit

Move

Select

The procedure on this page describes how to operate the

menus on the Setup screen. These menus are used to set

and adjust a number of system settings. The various

functions that can be adjusted are covered throughout

this manual. The procedure on this page provides a basic

outline for using the Setup screen menus.

Use the cursor buttons (2/3) to

select the menu you want.

As each menu is selected with the cursor,

the settings appear below the menu

heading.

Use the cursor buttons (∞) to enter

the menu.

The top item within the menu becomes

highlighted.

Use the cursor buttons (3) to enter

the setting options.

• Not all menu options can be changed

while a disc is playing. In these cases,

the options appear grayed out on the

screen and cannot be adjusted. To

change these settings, press 7 first

before pressing SETUP.

• Operating the menu after pressing 7

may cancel the resume function.

• Some menu options are not immediately

effective if set while a disc is playing. To

make these settings effective, stop

playback and then start again, or

change the settings while the disc is

stopped.

Use the cursor buttons (5/∞) to

select a new setting and press

ENTER to set the new setting in

memory.

Press RETURN or the cursor button (2) to

exit the options without making any

changes.

Press RETURN or the cursor button

(2) to go back to the main menu bar

to select another menu.

Press SETUP to close the Setup

screen.

The Setup screen closes.

Using the Setup Screen Menus

Press ON (STANDBY/ON on the

front panel).

Press SETUP.

The Setup screen appears.

SETUP

ENTER

RETURN

SETUP

Notes

• If you turn off the DVD player during setup, the settings are

canceled. Press SETUP to finish the setup.

• The memorized resume position may be erased by setup.

• The Setup screen always shows the latest settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dv sp 500 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info