Bedienungsanleitung Onkyo HT-R990 (Seite 30 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Using Basic Functions

With the supplied calibrated microphone,

Audyssey 2EQ

automatically determines the number of

speakers connected, their size for purposes of bass

management, optimum crossover frequencies to the

subwoofer (if present), and distances from the primary

listening position.

Audyssey 2EQ then removes the distortion caused by

room acoustics by capturing room acoustical problems

over the listening area in both the frequency and time

domain. The result is clear, well-balanced sound for

everyone. Audyssey 2EQ can be used with

Audyssey Dynamic EQ

and

Audyssey Dynamic Volume

(➔ pages 48, 49).

Before using this function, connect and position all of

your speakers.

Audyssey 2EQ offers two ways of measuring: the

“Audyssey Quick Start” and “Audyssey 2EQ Full

Calibration”.

•“Audyssey Quick Start” uses the measurement from

one position to perform the speaker setting only.

•“Audyssey 2EQ Full Calibration” uses the

measurement from three positions to correct room

response in addition to the speaker setting.

The more positions are used in measuring, the better the

listening environment will become. We recommend using

a measurement from three positions to create the best

listening environment.

The Quick Start takes 2 minutes and Full Calibration takes

about 10 minutes.

Total measurement time varies depending on the number

of speakers.

Measurement procedure

To create a listening environment in your home theater

that all listeners will enjoy, Audyssey 2EQ takes

measurements at up to three positions within the listening

area. Position the microphone at ear height of a seated

listener with the microphone tip pointed directly at the

ceiling using a tripod. Do not hold the microphone in your

hand during measurements as this will produce inaccurate

results.

a First measurement position

Also referred to as the Main Listening Position this

refers to the most central position where one would

normally sit within the listening environment.

Audyssey 2EQ uses the measurements from this

position to calculate speaker distance, level, polarity,

and the optimum crossover value for the subwoofer.

b Second measurement position

The right side of the listening area.

c Third measurement position

The left side of the listening area.

The distances from position a to b and a to c must be

at least 1 meter (3.3 ft).

Note

• Make the room as quiet as possible. Background noise and Radio

Frequency Interference (RFI) can disrupt the room

measurements. Close windows, televisions, radios, air

conditioners, fluorescent lights, home appliances, light dimmers,

or other devices. Turn off the cell phone (even if it is not in use)

or place it away from all audio electronics.

• The microphone picks up test tones played through each speaker

as Audyssey 2EQ Room Correction and Speaker Setup run.

• Audyssey 2EQ Room Correction and Speaker Setup cannot be

performed while a pair of headphones is connected.

Using the Automatic Speaker Setup

Turn on the AV receiver and the connected TV.

On the TV, select the input to which the AV receiver

is connected.

On the subwoofer, set the OUTPUT LEVEL

control to THX POSITION.

Set the speaker setup microphone at the Main

Listening Position a, and connect it to the SETUP

MIC jack.

The speaker setting menu appears.

Note

• The on-screen menus appear only on a TV that is

connected to the HDMI OUT. If your TV is

connected to other video outputs, use the AV

receiver’s display when changing settings.

abc

: Listening area

a to c: Listening position

Speaker setup microphone

SETUP MIC jack

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info