Bedienungsanleitung Onkyo HT-R990 (Seite 39 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

The Home menu provides you quick access to frequently

used menus without having to go through the long

standard menu. This menu enables you to change settings

and view the current information.

Note

For the PORT input selector, the name of Universal Port

Option Dock will be displayed.

Only when you have selected “Custom” in the “Picture

Mode” (➔ page 51), pressing ENTER allows you to adjust

the following items via the Home menu

: “Brightness”,

“Contrast”, “Hue” and “Saturation”. Press RETURN to

return to the “Picture Mode” setting.

Depending on the input source and listening mode, not all

channels shown here output the sound.

With the sleep timer, you can set the AV receiver to turn

off automatically after a specified period.

You can adjust the brightness of the AV receiver’s

display.

Using the Home Menu

The on-screen menus appear only on a TV that is

connected to the HDMI OUT. If your TV is connected

to other video outputs, use the AV receiver’s display

when changing settings.

Press RECEIVER followed by HOME.

The Home menu will be superimposed on the TV

screen.

Use q/w and ENTER to make the desired selection.

■ Input

` You can select the input source while viewing the

information as follows: the name of input

selectors, input assignments, radio information,

and ARC function setting.

Press ENTER to display the current input

source, followed by q/w to select the desired

input source. Pressing ENTER again switches

to the selected input source.

■ Audio

` You can change the following settings: “Bass”,

“Treble”, “Subwoofer Level”, “Center Level”,

“Audyssey”, “Dynamic EQ”,

“Dynamic Volume”, “Late Night”, “Music

Optimizer”, “Re-EQ” and “Re-EQ(THX)”.

See also:

• “Picture Adjust” (➔ page 51)

■ Info

` You can view the information of the following

items: “Audio”, “Video” and “Tuner”.

■ Listening Mode

` You can select the listening modes that are

grouped in the following categories:

MOVIE/TV, MUSIC, GAME and THX.

Use q/w to select the category and e/r to

select the listening mode. Press ENTER to

switch to the selected listening mode.

Using the Sleep Timer

Press RECEIVER followed by SLEEP repeatedly

to select the required sleep time.

The sleep time can be set from 90 to 10 minutes in 10

minute steps.

The SLEEP indicator lights on the display when the

sleep timer has been set. The specified sleep time

appears on the display for about 5 seconds, then the

previous display reappears.

Tip

• If you need to cancel the sleep timer, press SLEEP

repeatedly until the SLEEP indicator goes off.

• To check the time remaining until the AV receiver sleeps,

press SLEEP. Note that if you press again on SLEEP as

the time being displayed is equal or inferior to 10 minutes,

the sleep timer will go off.

Setting the Display Brightness

Press RECEIVER followed by DIMMER

repeatedly to select:

• Normal

•Dim

• Dimmer

Tip

• (North American models) Alternatively, you can use the

AV receiver’s DIMMER.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info