Bedienungsanleitung Onkyo HTX-22HDX (Seite 46 von 56) (Englisch)

492671

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Troubleshooting

If you have any trouble using the

HTX-22HDX, look for a solution in this sec-

tion. If you can’t resolve the issue yourself,

contact your Onkyo dealer.

Can’t turn on the HTX-22HDX

• Make sure that the power cord is plugged into

the wall outlet properly.

• Unplug the power cord from the wall outlet,

wait 5 seconds or more, then plug it back in

again.

There’s no sound or it’s very quiet

• Make sure you’ve selected the appropriate

input (page 28).

• Check the volume (page 28). The

HTX-22HDX is designed for home theater

enjoyment and has a wide volume range for

precise adjustment.

• Make sure that all audio connecting plugs are

pushed in all the way (page 18).

• Make sure that the cables are properly con-

nected to the output jacks on the source com-

ponent.

• Make sure that the polarity of the speaker

cables is correct, and that the bare wire is in

contact with the metal part of each speaker ter-

minal (page 16).

• Make sure that the speaker cables are not

shorting.

• Check the digital audio output settings on the

source component. On some game consoles,

such as those that can play DVDs, the default

setting is off.

• With some DVD-Video discs, you need to

select an audio format from a menu or with the

AUDIO button on your Blu-ray/DVD

player/recorder’s remote controller.

• If your turntable doesn’t have a phono preamp

built-in, you must connect one between it and

the HTX-22HDX.

• If your turntable uses an MC cartridge, you

must connect an MC head amp, or an MC

transformer and a phono preamp.

• Check the speaker configuration (page 39).

• If there’s no sound from a Blu-ray/DVD

player/recorder connected to an HDMI IN,

check its output settings, and be sure to select

a compatible audio format.

Only the front speakers produce sound

• When the Stereo or Mono listening mode is

selected, only the front speakers and sub-

woofer produce sound.

• Check the Speaker Configuration (page 39).

Only the center speaker produces sound

• If you use the Dolby Pro Logic II listening

mode with a mono source, such as an AM

radio station or mono TV program, the sound

will be concentrated in the center speaker.

• Check the Speaker Configuration (page 39).

The center speaker produces no sound

• When the Stereo or Mono listening mode is

selected, the center speaker produces no

sound.

• Check the Speaker Configuration (page 39).

The surround speakers produce no sound

• When the Stereo or Mono listening mode is

selected, the surround speakers produce no

sound.

• Depending on the source and the current lis-

tening mode, not much sound may be pro-

duced by the surround speakers. Try another

listening mode (page 32).

• Check the Speaker Configuration (page 39).

Power

Audio

Before you contact your Onkyo dealer, try

resetting the HTX-22HDX, as follows:

To reset the HTX-22HDX to its factory

defaults, turn it on and, while holding

down the [LISTENING MODE] button,

press the [ON/STANDBY] button.

“Clear” will appear on the display and

the HTX-22HDX will enter Standby mode.

Note that resetting the HTX-22HDX will

delete all of your custom settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HTX-22HDX Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HTX-22HDX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info