Bedienungsanleitung Onkyo HTX-22HDX (Seite 47 von 56) (Englisch)

492671

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Troubleshooting—Continued

The subwoofer produces no sound

• If the source material contains no audio in the

LFE channel, the subwoofer produces no

sound.

• Check the Speaker Configuration (page 39).

There’s no sound with a certain signal for-

mat

• Check the digital audio output setting on the

source component. On some game consoles,

such as those that can play DVDs, the default

setting is off.

• With some DVD-Video discs, you need to

select an audio format from a menu or with the

AUDIO button on your Blu-ray/DVD

player/recorder’s remote controller.

The volume cannot be set to 79

• Check to see if a maximum volume has been

set (page 43).

• When the levels of each speaker have been

adjusted (page 40), the maximum possible

volume may be reduced.

Noise can be heard

• Using cable ties to bundle audio cables with

power cords, speaker cables, and so on can

degrade audio performance, so don’t use

them.

• An audio cable may be picking up interfer-

ence. Try repositioning your cables.

The Late Night function doesn’t work

• Make sure that the source is Dolby Digital or

Dolby TrueHD (page 36).

About DTS signals

• When playing DTS program material, using

the pause, fast forward, or fast reverse func-

tion on your player may produce a short audi-

ble noise. This is not a malfunction.

• When DTS program material ends and the

DTS bitstream stops, the HTX-22HDX

remains in DTS listening mode and the DTS

indicator remains on. This is to prevent noise

when you use the pause, fast forward, or fast

reverse function on your player. If you switch

your player from DTS to PCM, as the

HTX-22HDX does not switch formats imme-

diately, you may not hear anything, in which

case you should stop your player for about 3

seconds, and then resume playback.

• With some CD players, you won’t be able to

playback DTS material properly even though

your player is connected to a digital input on

the HTX-22HDX. This is usually because the

DTS bitstream has been processed (e.g., out-

put level, sampling rate, or frequency response

changed) and the HTX-22HDX doesn’t recog-

nize it as a genuine DTS signal. In such cases,

you may hear noise.

The beginning of audio received by an HDMI

IN can’t be heard

• Since it takes longer to identify the format of

an HDMI signal than it does for other digital

audio signals, sound may not be output imme-

diately.

The remote controller doesn’t work

• Make sure that the batteries are installed with

the correct polarity (page 12).

• Make sure that the remote controller is not too

far away from the HTX-22HDX and there’s no

obstruction between the remote controller and

the HTX-22HDX’s remote control sensor

(page 12).

Can’t control other components

• To control an Onkyo RI-capable component or

RI Dock with iPod that’s connected with ,

remember to point the remote controller at the

HTX-22HDX, not the other device.

How do I change the language of a multiplex

source?

• On the Audio Adjust menu, change the Input

(Mux) setting to Main or Sub (page 40).

The  functions don’t work

• To use , you must make an  connection

and an analog audio connection (RCA)

between the component and HTX-22HDX,

even if they are connected digitally (page 23).

Remote Controller

Others

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HTX-22HDX Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HTX-22HDX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info