Bedienungsanleitung Onkyo RDC-7.1 (Seite 149 von 156) (Englisch)

601422

149

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

149

Miscellaneous

Troubleshooting

If you have any trouble using your RDC-7.1, look for a solu-

tion in this section. If you can’t resolve the issue yourself, con-

tact the dealer from whom you purchased this unit.

Can’t turn on the RDC-7.1?

• Make sure that the power cord is properly plugged into the

wall outlet. And also, make sure that the other end of the

power cord is properly connected to the RDC-7.1’s AC

INLET.

• Unplug the power cord from the wall outlet, wait ﬁve sec-

onds or more, then plug the cord in again.

The RDC-7.1 turns off as soon as it’s turned on?

• The amp protection circuit has been activated.

Remove the power cord from the wall outlet immediately

and contact the dealer from whom you purchased this unit.

The [Standby] indicator on the RDC-7.1 remains lit?

• It is supposed that the RDC-7.1 is using a source in Zone 2

or 3. When not using, set both Zone 2 and 3 to “Off” (page

71).

There’s no sound, or it’s very quiet?

• Make sure that all audio connecting plugs are pushed in all

the way.

• Make sure that the inputs and outputs of all components are

connected properly (pages 25-44).

• Make sure that the polarity of the speaker cables is correct

and that the bare wires are in contact with the metal part of

each speaker terminal on the power ampliﬁer.

• Make sure that the input source is properly selected (pages

52, 53).

• Check the volume. It can be set from –81.5 to +18 (pages

52, 53).

The RDC-7.1 is designed for home theater enjoyment. It

has a wide volume range, allowing for precise adjustment.

• If the MUTING indicator is shown on the display, press the

remote controller’s [Muting] button to unmute the RDC-7.1

(page 54).

• While a pair of headphones is connected to the Phones

jack, no sound is output by the speakers (page 54).

• Check the digital audio output setting on the connected

device. On some games consoles, such as those that support

DVD, the default setting is off.

• With some DVD-Video discs, you need to select an audio

output format from a menu.

• Make sure that the correct input signal audio format is

selected with the [Audio SEL] button (page 57).

• To use a turntable with an MC-type cartridge requires a

commercially available MC phono preamp (page 38).

• Make sure that none of the connecting cables is bent,

twisted, or damaged.

• Not all listening modes use all of the speakers.

• Specify the Speaker/Output Setup and Input Setup (pages

92-102).

Only the front speakers produce sound?

• When the Stereo listening mode is selected, only the front

speakers and subwoofer produce sound.

• When the Direct or Pure Audio listening mode is selected,

only the front speakers produce sound.

• Make sure the speakers are conﬁgured correctly (page 92).

Only the center speaker produces sound?

• If you use the Pro Logic II/IIx Movie or Pro Logic II/IIx

Music listening mode with a mono source, such as an AM

radio station or mono TV program, the sound is concen-

trated in the center speaker.

• Make sure the speakers are conﬁgured correctly (page 92).

The surround speakers produce no sound?

• When the Stereo, Direct, or Pure Audio listening mode is

selected, the surround speakers produce no sound (page

58).

• Depending on the source and current listening mode, not

much sound may be produced by the surround speakers.

Try selecting another listening mode.

• Make sure the speakers are conﬁgured correctly (page 92).

The center speaker produces no sound?

• When the Stereo, Direct, or Pure Audio listening mode is

selected, the center speaker produces no sound (page 58).

• When the listening mode is set to “Mono,” no sound can be

present in the center speaker.

• Make sure the speakers are conﬁgured correctly (page 92).

The surround back speakers produce no sound?

• The surround back speakers are not used with all listening

modes. Select another listening mode (pages 58-60).

• Not much sound may be produced by the surround back

speakers with some sources.

• If the “SB Mode (5ch)” is available in any sub-menu of the

“Listening Mode Setup” menu, make sure that it is not set

to “Off” (pages 106-112).

• Make sure the speakers are conﬁgured correctly (page 92).

The subwoofer produces no sound?

• When you play source material that contains no informa-

tion in the LFE channel, the subwoofer produces no sound.

• Make sure the speakers are conﬁgured correctly (pages 92,

93).

There’s no sound with a certain signal format?

• Check the input signal format setting. Depending on the

playback source, you can select Auto, Multich, Analog, or

i.LINK (page 57).

• Check the digital audio output setting on the connected

device. On some games consoles, such as those that support

DVD, the default setting is off.

• With some DVD-Video discs, you need to select an audio

output format from a menu.

• Depending on the input signal, some listening modes can-

not be selected (pages 143-145).

Can’t select the DTS-ES Discrete/Matrix or THX Sur-

round EX listening modes?

• These modes cannot be selected when no surround back

speakers are connected, or Zone 2/3 is being used.

• If the “SB Mode (5ch)” is available in any sub-menu of the

“Listening Mode Setup” menu, make sure that it is not set

to “Off” (pages 106-112).

Power

Audio

Onkyo RDC-7.1 Seite 149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo RDC-7.1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info