Bedienungsanleitung Onkyo RDC-7.1 (Seite 151 von 156) (Englisch)

601422

151

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

151

Miscellaneous

Troubleshooting

—Continued

Can’t learn commands from other remote control-

lers?

• Make sure that the transmitting ends of both remote con-

trollers are pointing at each other.

• Are you trying to learn from a remote controller that cannot

be used for learning? Some commands cannot be learned,

especially those that transmit several instructions with a

single button press.

Can’t record?

• On your recorder, make sure the correct input is selected

(e.g., digital or analog).

• Make sure that proper output settings are made for the con-

nected devices. Settings are available in the “Rec Out” of

the “Audio Output Assign” and “Video Output Assign”

sub-menus under the “Speaker/Output Setup” menu (pages

95, 96).

Zone 2/3 has turned off?

• Was the Sleep function set? The Sleep function turns off

Zone 2/3 as well as the RDC-7.1. To set the Sleep function

for Zone 2/3 only, see page 69.

There’s no sound?

• Recording and Zone 3 operations use the same circuit and

therefore cannot be used at the same time. Make sure that

proper settings are made for outputs. Settings are available

in “Zone 2 Out” or “Zone 3 Out” of the “Audio Output

Assign” and “Video Output Assign” sub-menus under the

“Speaker/Output Setup” menu (pages 95, 96).

The Surr Back speaker setting doesn’t appear?

• If no surround back speakers are connected, or the surround

back outputs are being used with Zone 2/3, this setting is

unavailable.

Can’t access Internet radio or the Net-Tune server?

• Check the connection between the RDC-7.1 and the LAN

port on your router or switch.

• Make sure that your modem and router are properly con-

nected, and make sure they are both turned on.

• Make sure that the Network Setup settings are correct (page

122).

Playback stops while listening to Net-Tune tracks?

• Make sure that your Net-Tune server meets the system

requirements listed on pages 74, 76.

• If the Net-Tune server is serving WAV ﬁles to several cli-

ents at the same time, the network may become overloaded

and playback may be interrupted. This can be resolved by

preparing an Ethernet network exclusively for use with

Net-Tune, separating it from general network trafﬁc, and by

using switches to improve network performance.

Can’t get a list of Internet radio stations from the Xiva-

Net online database?

• Try again later.

Can’t access music on the selected server, or can’t

connect to the server?

• Make sure that your Net-Tune server is turned on.

• Add the MP3, WMA, and WAV ﬁles on your Net-Tune

server.

• Set the RDC-7.1’s [Power] switch to Off, wait ﬁve seconds,

and then set it to On again. If that doesn’t help, restart your

Net-Tune server.

• On the Client Sub-menu, make sure that the NTSP Port set-

ting is set to the same port number as Net-Tune Central.

Correct as necessary (page 123).

Can’t select albums?

• Use the Net-Tune server to add album names to your music

ﬁles.

Can’t select artists?

• Use the Net-Tune server to add artist names to your music

ﬁles.

Can’t select by genre?

• Use the Net-Tune server to add genre names to your music

ﬁles.

No playlists are available?

• Use the Net-Tune server to create some playlists.

The sound changes when I connect my headphones?

• When a pair of headphones is connected, its listening mode

changes depending on the mode that was set before it was

connected.

Can’t change a setting?

• Some settings are not available while using Net-Tune.

Can’t use an audio adjust function?

• Some audio adjust functions can’t be used with certain lis-

tening modes.

The display doesn’t work?

• The display is turned off when the Pure Audio listening

mode is selected.

Recording

Zone 2/Zone 3

Net-Tune

Others

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo RDC-7.1 Seite 151

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo RDC-7.1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info