Bedienungsanleitung Onkyo RDC-7.1 (Seite 152 von 156) (Englisch)

601422

152

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

152

Troubleshooting

—Continued

“Not available with Headphones use”

• Operation not allowed while a pair of headphones is con-

nected.

“Not available in this Sp Conﬁg”

• Doesn’t work with the current speaker conﬁguration.

“Only available with Dolby D”

• Can be used with only Dolby Digital.

“Not available with this signal”

• Doesn’t work with the current listening mode.

“Not available with Muting”

• Operation not allowed because the RDC-7.1 is currently

muted.

“Not available in this Listening Mode”

• Doesn’t work with the current listening mode.

“Not available with NET AUDIO use”

• Operation not possible with Net Audio selected for the

input source.

“Not available with Dolby Headphone Off”

• Doesn’t work with the Dolby Headphone function off.

“Not available with Dolby Headphone On”

• Doesn’t work with the Dolby Headphone function on.

“Not available with zone2 out in Line out”

• Operation not possible with “1-8. f. Zone 2 Out” set to

“Line Out.”

“Not available with zone3 out in Line out”

• Operation not possible with “1-8. g. Zone 3 Out” set to

“Line Out.”

Speciﬁcations

– USA and Canadian models –

General

Error Messages

Memory backup

The RDC-7.1 uses a battery-less memory backup sys-

tem in order to retain radio presets and other settings

when it is unplugged or in the case of a power failure.

Although no batteries are required, the RDC-7.1 must

be plugged into an AC outlet in order to charge the

backup system.

(On other than USA, Canadian, and Australian models,

the RDC-7.1’s Power switch must be set to On in order

to charge the backup system). Once it has been

charged, the RDC-7.1 will retain the settings for several

weeks, although this depends on the environment and

time will be shorter in humid climates.

The RDC-7.1 contains a microcomputer for signal pro-

cessing and control functions. In very rare situations,

severe interference, noise from an external source, or

static electricity may cause it to lockup. In the unlikely

event that this happens, unplug the power cord from the

wall outlet, wait at least ﬁve seconds, and then plug it

back in again.

To reset the RDC-7.1 to its factory defaults, turn it on

and, while holding down the [Video 1] button, press the

[Standby/On] button. When the reset is complete,

“CLEAR” appears on the display and the RDC-7.1

enters Standby mode.

Onkyo is not responsible for damages (such as CD rental

fees) due to unsuccessful recordings caused by the

unit’s malfunction. Before you record important data,

make sure that the material will be recorded correctly.

Power Supply Rating: AC 120 V, 60 Hz

Consumption Power: 1.0 A

Standby Power Consumption: 3.9 W

Dimensions (W

D): 17 11/16"

7 3/4"

18 13/16"

(450

197.3

477.1 mm)

Weight: 45.6 lbs (20.7 kg)

Inputs:

Audio

Multichannel (7.1ch) Inputs: 1 or 2 (option)

Phono (MM): 1

Line inputs: 9 (assignable)

Digital inputs Coaxial: 6

Digital inputs Optical: 6 (assignable)

Digital inputs AES/EBU 1 (option)

Video (Option)

Composite Video inputs: 6 (assignable)

S Video inputs: 6 (assignable)

Component Video RCA

inputs: 3 or 4

Component Video BNC

input: 1

Audio and Video

HDMI inputs (19-pin): 2 (option)

Miscellaneous

IR in (phoenix connector): 3 (for Main, Zone 2 and Zone 3)

Outputs:

Audio

Balanced Pre out A: Front L/R, Center, Surround L/R,

Surround Back L/R, Subwoofer

Unbalanced Pre out A: Front L/R, Center, Surround L/R,

Surround Back L/R, Subwoofer

Unbalanced Pre out B: Subwoofer

Headphones: 1

Line outputs: 5 (assignable to Recout, Zone 2 out

and Zone 3 out)

Digital outputs Coaxial: 2 (assignable to Recout, Zone 2 out

and Zone 3 out)

Digital outputs Optical: 2 (assignable to Recout, Zone 2 out

and Zone 3 out)

Video (Option)

Composite Video outputs: 3 (assignable to Monitor out A/B,

Recout, Zone 2 out and Zone 3 out)

1 (ﬁxed, Monitor out A)

S Video outputs: 3 (assignable to Monitor out A/B

and Recout)

1 (ﬁxed, Monitor out A)

Component Video RCA

outputs: 1 or 2

Component Video BNC

output: 1

Audio and Video

HDMI output (19-pin): 1

Miscellaneous

12V Trigger out (phoenix

connector): 5 (for A, B, C, D, E)

Inputs/Outputs:

Miscellaneous

i. LINK(AUDIO) (4 pin): 2

Ethernet (Net-Tune): 1 (option)

(1/8-inch mini-jack):

RS232 (9 pin D-SUB

Female connector): 1

Antennas:

FM: 75 ohms unbalanced

AM: Included loop antenna and external

terminal

AC Inlet: 1 (IEC type)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo RDC-7.1 Seite 152

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo RDC-7.1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info