553751
29
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
29
To record the input source signal you are
currently watching or listening to
Recording of video and/or audio signals can be performed on the
components connected to the VIDEO 2 OUT and TAPE OUT
(audio only) jacks.
1. Press an input selector button to select the
input source to record.
The input source is now selected and you may watch or listen
to it as desired. The currently selected input source signal to
the TAPE OUT and VIDEO 2 OUT outputs for recording.
2. Start recording at the recording component as
desired.
Notes:
You can record analog audio, but not digital audio. Make sure
that you have made a correct analog connection.
If you change the input source during recording, you will
record the signals from the newly selected input source.
You cannot record the surround effects.
You cannot record the source connected to the MULTI
CHANNEL INPUT port.
Recording the video from one source and the
audio from another
You can add the sound from one source to the video of another
source to make your own video recordings.
Below is an example of recording the sound from a compact disc
player connected to CD L/R jacks and the video from a video
camera connected to VIDEO 1 IN VIDEO jack to video cassette
tape in a video cassette recorder connected to the VIDEO 2 OUT
L/R and VIDEO jacks.
Recording a source
STANDBY/ON
OFF
ON
POWER
PHONES
MASTER VOLUME
BASS
TREBLE
AV
RECEIVER
TX
-
DS
494
FM
AM
PHONO
C
D
TAPE
VIDEO
1
DVD
ABSPEAKERS
DIMMER
SURROUND
DTS/
VIDEO
2
VCR
AUDIO
SELECTOR
LISTENING MODE
DSP
STEREO
DISPLAY
STANDBY
SP SEL TUNING PRESET
MEMORY
SW
MODE
DIGITAL
INPUT
FM
MODE
CLEAR
1. Insert a CD in the CD player and insert a tape in
the video camera connected to the VIDEO 1.
2. Insert a video tape for recording in the video
cassette recorder connected to VIDEO 2 OUT.
3. Press the VIDEO 1 input selector button.
4. Press the CD input selector button.
This switches the audio output to CD, but the video output
remains VIDEO 1 that has been selected in step 3.
5. Start recording on the video cassette recorder
and start playing at the CD player and video
camera as desired.
The recorded video signal becomes the output from the video
camera and recorded audio signal becomes that from the CD
player.
Notes:
You can record analog audio, but not digital audio. Make sure
that you have made a correct analog connection.
If you change the input source during recording, you will
record the audio signals from the newly selected input source
and the video signals assigned to that input source.
You cannot record the surround effects.
R
R
FRONT
CENTER
SURR
R
L
IN
OUT
VIDEO
PHONO
CD
VIDEO 2
VIDEO 1
R
L
IN
MULTI
CHANNEL
GND
Video
camera
CD player
1, 5
1, 5
Video cassette
recorder
2, 5
Input selector
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo TX-DS494 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Onkyo TX-DS494

Onkyo TX-DS494 Bedienungsanleitung - Deutsch - 34 seiten

Onkyo TX-DS494 Bedienungsanleitung - Französisch - 34 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info