Bedienungsanleitung Onkyo TX-DS696 (Seite 37 von 64) (Englisch)

553753

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Setup menus

1-1. Speaker Config sub-menu

Here you will enter which speakers are connected and the size of

each speaker.

a. Subwoofer

Yes: Select when a subwoofer is connected.

No: Select when a subwoofer is not connected.

b. Front

Large: Select if the front speakers are large sized.

Small: Select if the front speakers are small sized.

• If “No” is selected for the Subwoofer setting, then this setting

is fixed to “Large.”

c. Center

None: Select if no center speaker is connected.

Large: Select if the center speaker is large sized.

Small: Select if the center speaker is small sized.

• If “Small” is selected for the Front setting, then “Large”

cannot be selected for this setting.

d. Surround

None: Select if no surround left and right speakers are

connected.

Large: Select if the surround left and right speakers are large

sized.

Small: Select if the surround left and right speakers are small

sized.

• If “Small” is selected for the Front setting, then “Large”

cannot be selected for this setting.

1-3. Level Calibration sub-menu

Here you will set the volume for each speaker so that they are all

heard by the listener at the same level. This is especially important

for speaker layouts where the left and right speakers are at different

distances or in asymmetrical positions due to room designs and

configurations. These settings and the distance settings performed

above are vital to create the proper acoustics required for the

optimum sound space and dynamics.

Note:

The speaker level settings here are not effective for multi-channel

input sources. To adjust the speaker levels for multi-channel input

sources, you will need to use the CH SEL, LEVEL

, and LEVEL

buttons on the RC-440M remote controller. See pages 30, 31.

Calibrating the speaker levels

(1) When this sub-menu is entered, the TX-DS696 will emit a pink

noise from the front left speaker. At this time, the Master volume

automatically increases to the reference level (0dB). Remember

the level of this noise and then press the

cursor button. (Note

that this can be adjusted to any level between –12 and 12

decibels in 1-decibel intervals.) The TX-DS696 will now emit

the pink noise from the center speaker.

(2) Using the

and cursor buttons, adjust the volume level of the

noise from the center speaker so that it is the same level as the

front left speaker. You can jog back and forth between the

speakers to help you compare the volume levels.

(3) Press the

cursor button again. The TX-DS696 will now emit

the pink noise from the front right speaker.

(4) Repeat steps (2) and (3) above for the front right and other

speakers until all speakers are adjusted to the same volume level.

Note:

• Speakers that you selected “No” or “None” for in the Speaker

Config sub-menu will not appear.

a. Left

Sound comes from the front left speaker. Adjust the sound level

between –12 and 12 decibels in 1-decibel intervals.

b. Center

Sound comes from the center speaker. Adjust the sound level

between –12 and 12 decibels in 1-decibel intervals.

c. Right

Sound comes from the front right speaker. Adjust the sound level

between –12 and 12 decibels in 1-decibel intervals.

d. Surr Right

Sound comes from the surround right speaker. Adjust the sound

level between –12 and 12 decibels in 1-decibel intervals.

e. Surr Left

Sound comes from the surround left speaker. Adjust the sound level

between –12 and 12 decibels in 1-decibel intervals.

f. Subwoofer

Sound comes from the subwoofer. Adjust the sound level between

–12 and 12 decibels in 1-decibel intervals.

1-2. Speaker Distance sub-menu

Here you will enter the distance from each speaker to your normal

listening position. This is important for the timing of the acoustics to

create the proper sound space that the TX-DS696 and today’s sound

systems are able to produce.

Note:

Speakers that you selected “No” or “None” for in the Speaker Config

sub-menu will not appear.

a. Unit

feet: Select if you will enter the distances in feet.

meters: Select if you will enter the distances in meters.

b. Front L/R

Set the distance from the front left and right speakers to your normal

listening position between 1 and 30 feet in 1-feet intervals (0.3 to 9

meters in 0.3-meter intervals).

Position the front left and right speakers so that they are the same

distance from the listener. If they are not, you may lose the center

position for stereo sound.

c. Center

Set the distance from the center speaker to your normal listening

position between 1 and 30 feet in 1-feet intervals (0.3 to 9 meters in

0.3-meter intervals).

d. Surround L/R

Set the distance from the surround left and right speakers to your

normal listening position between 1 and 30 feet in 1-feet intervals

(0.3 to 9 meters in 0.3-meter intervals).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS696 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS696

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info