Bedienungsanleitung Onkyo TX-DS696 (Seite 39 von 64) (Englisch)

553753

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Setup menus

2-1. Audio Setup sub-menu

The settings made in this sub-menu are valid for the input source that

is currently selected with the input source buttons at the front panel

and, therefore, these settings are made separately for each digital

input source. This sub-menu will not appear if the selected input

source button is AM or FM. If this setting is incorrectly made, the

digital audio signals may not be properly output, or not heard at all.

a. Digital Input

This setting tells the TX-DS696 which input source button on the

front panel is connected with which digital input jack on the rear

panel. To perform this setting, you must first select a digital input

source at the front panel and then set the name of the digital input

jack it is connected to here.

For example, if the input source selected at the front panel is CD and

the compact disc player is connected to DIGITAL INPUT

(OPTICAL) 1, then select “OPT1” here. If the input source selected

is not connected to a digital input, then select “----.”

OPT1: Select if connected to DIGITAL INPUT (OPTICAL) 1.

OPT2: Select if connected to DIGITAL INPUT (OPTICAL) 2.

COAX1: Select if connected to DIGITAL INPUT (COAXIAL) 1.

COAX2: Select if connected to DIGITAL INPUT (COAXIAL) 2.

----: Select if the input source is not from a digital input jack.

Note:

Do not assign a digital input to more than one input source. If you are

making a digital connection that requires you to change the default

settings, be sure to always first cancel the current digital input setting

and then assign the new setting.

b. Multichannel

This sub-menu will not appear if AM or FM is selected at the front

panel for the input source. The initial settings are “Yes” for the DVD

input source and “No” for all other input sources. This setting is

normally set to “No,” and only needs to be changed to “Yes” if a

DVD player, MPEG decoder, or other component that has a multi

channel port is connected to the MULTI CHANNEL INPUT port for

5.1-channel audio. For example, if a DVD player is connected to the

MULTI CHANNEL INPUT port, then select DVD at the front panel

as the input source, bring up this sub-menu, and select “Yes” for the

Multichannel setting. You can only select Multichannel with the

AUDIO SELECTOR button when “Yes” is selected here.

Note:

When playing a device that is actually connected to the MULTI

CHANNEL INPUT terminal, select Multichannel with the AUDIO

SELECTOR button.

Input source selected Component video input

DVD INPUT 1

VIDEO1 INPUT 2

VIDEO2 INPUT 1

VIDEO 3 INPUT 1

VIDEO 4 INPUT 1

----: Available for digital input but not set in initial settings.

: Not available for digital input.

Initial settings for each input source

Input source Digital input Multichannel

DVD COAX 1 Yes

VIDEO1 COAX 2 No

VIDEO2 ---- No

VIDEO 3 OPT2 No

VIDEO 4 ---- No

TAPE ---- No

PHONO ---- No

CD OPT 1 No

2-2. Video Setup sub-menu

a. Component Video

If a component is connected to the one of the COMPONENT

VIDEO inputs (1 or 2), then that input must be set here. This setting

will not appear if AM, FM, PHONO, CD or TAPE is selected as the

input source.

The default settings are given below.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS696 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS696

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info