Bedienungsanleitung Onkyo TX-DS696 (Seite 40 von 64) (Englisch)

553753

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Setup menus

2-4. IntelliVolume sub-menu

a. IntelliVolume

When switching input sources, you may find that the output level for

different components or input sources connected to the TX-DS696 is

different even though the main volume setting is the same. Under

normal circumstances, you would then have to change the volume

setting each time you change the input source. This IntelliVolume

sub-menu allows you to preset a volume level for each input source

separately so that when you do switch from one input source to

another, the TX-DS696 adjusts the volume accordingly so that the

resulting volume stays the same. To set the IntelliVolume, simply

select an input source at the front panel, and if that source is quieter

than other sources, increase its decibel level with the

cursor

button, or if it is louder than other sources, decrease its decibel level

with the

cursor button.

The IntelliVolume can be adjusted between –12 and +12 decibels.

Input source signal (display) Analog/PCM Source Digital Format

Type of media Tape, CD, DVD,

Record, Tuner Digital satellite broadcast,

DVD Video (PCM), LD (PCM) DTS-CD

Digital satellite broadcast Dolby Digital 2ch Source DTS,

All excluding

Listening Mode Dolby Digital 2ch

Direct ●

Stereo ●●●

Surround Pro Logic II (Movie) ●●

Pro Logic II (Music) ●●

Dolby Digital ●

DTS ●

Orchestra ●

Unplugged ●

Studio-Mix ●

TV Logic ●

All Ch Stereo ●

Relationship between input source and listening mode

Notes:

• The listening modes that can be set are different for each input source format.

• You may not be able to select all the listening modes shown here depending on your speaker

configuration or the selected input source.

2-3. Listening Mode Preset sub-menu

With the TX-DS696, you can set a different listening mode for each

different signal type that comes from each input source and also set

the parameters for the listening mode itself. For example, if your

DVD player also plays compact discs and the DVD video signal is

DTS and the compact disc signal is PCM, then you can set a different

listening mode for each.

This is especially convenient if you frequently play the same types of

movies or music.

Input source signals

a. Analog/PCM Source

Set a listening mode for the input signal from analog sources and

PCM sources.

Note:

For PCM sources recorded at a sampling rate of 96 kHz or greater,

only the Stereo or Direct listening modes can be selected. However,

the set listening mode is stored in memory.

b. Digital Format

Set a listening mode for the input signal from Dolby Digital and DTS

sources.

• The TX-DS696 will automatically switch to the listening mode

set for the current input signal. For example, even when using

the same DVD player, if a CD is played, the listening mode

automatically becomes “Stereo,” and if a DVD is played (Dolby

Digital 3/2.1), the listening mode automatically becomes Dolby

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS696 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS696

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info