Bedienungsanleitung Onkyo TX-DS787 (Seite 37 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Input Setup

1.Speaker Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

5.OSD Setup

|ENTER| Quit:|OSD|

2.Input Setup

Input:DVD

a.Audio Setup

b.Video Setup

c.Listening Mode Preset

d.Tone Control

e.IntelliVolume

f.12V Trigger

|ENTER| Quit:|OSD|

2-3.ListeningMode Preset

Input:DVD

a.2ch Source

:Stereo

b.PCM fs=96k :Stereo

c.Multichannel,Mono

Source :Surround

Quit:|OSD|

Relationship between input source and listening mode

The listening modes that can be set are different for each input source format.

Note:

You may not be able to select all the listening modes shown here depending on your speaker configuration or the selected input

source.

* The 5.1-channel digital surround format has a variety of

versions including Dolby Digital and DTS. The 5.1- channel

digital surround format enables you to individually record and

play five full-range (20 Hz to 20 kHz) channels (left and right

front, center, and two surround channels) plus an LFE channel

(Low Frequency Effect) for the low-range effect sound. It will

create a realistic sound that can be heard in the theaters and

concert halls.

2-3. Listening Mode Preset sub-menu

With the TX-DS787, you can set a different listening mode for

each different signal type that comes from each input source and

also set the parameters for the listening mode itself. For example,

if your DVD player also plays compact discs and the DVD video

signal is DTS and the compact disc signal is PCM, then you can set

a different listening mode for each.

This is especially convenient if you frequently play the same types

of movies or music.

Input source signals

a. 2ch Source

Set a listening mode for the input signal from 2-channel analog

sources, PCM sources, and 2/0-channel Dolby Digital and DTS

sources.

b. PCM fs=96k

Set a listening mode for the input signal from digital PCM sources

recorded with a sampling rate of 96 kHz.

c. Multichannel, Mono Source

Set a listening mode for the input signal from 2/1, 2/2, 3/0, 3/2-

channel Dolby Digital and DTS sources. Or, set a listening mode

for the input signal from 1/0-channel (Mono) Dolby Digital and

DTS sources.

• The TX-DS787 will automatically switch to the listening

mode set for the current input signal. For example, even when

using the same DVD player, if a CD is played, the listening

mode automatically becomes “Stereo,” and if a DVD is played

(Dolby Digital 3/2.1), the listening mode automatically

becomes Dolby D.

Input source signal (display)

2ch PCM fs=96k Multichannel, Mono

Type of software Tape, CD, DVD DVD, LD,

Record, Tuner Digital satellite

DVD Video (Stereo), LD (Stereo) broadcast

Digital satellite DTS-CD

Listening Mode broadcast

Direct ●●

Stereo ●●●

Theater-Dimensional ●●

Surround ●●

(Pro Logic (3 Stereo), (DolbyD,

DolbyD, DTS) Dolby D/6.1, DTS,

DTS-ES)

THX ●●

(Cinema) (Cinema,

Surround EX)

Mono Movie ●●

Enhanced 7 ●●

Orchestra ●●

Unplugged ●●

Studio-Mix ●●

TV Logic ●●

All Ch Stereo ●

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info