Bedienungsanleitung Onkyo TX-DS787 (Seite 43 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Listening Mode Setup

Description listening mode parameters

Subwoofer

Set this to “Off” if you are not using a subwoofer (even if one is

connected). If “No” is selected for the Subwoofer setting in the

Speaker Config sub-menu, then this setting will not appear.

Re-EQ

Depending on the listening mode, you can either turn Re-EQ on or

off.

Re-EQ: Re-EQ (re-equalization) takes the edginess or

“brightness” out of your home cinema sound to compensate for

the fact that sound mixed for theaters may sound too bright

when played back through speakers in the home environment.

On: Select to turn on the re-equalization filter.

Off: Select to turn off the re-equalization filter.

Surround Speakers

This setting allows you to decide which speakers to output to when

surround back speakers are connected and you are playing back a

5.1-channel source.

Surround L/R: This outputs the sound to the surround left and

right speakers as normal and outputs nothing to the surround

back speaker.

Surround Back: This outputs the sound to the surround back

speakers and outputs nothing to the surround left and right

speakers. This setting can only be selected when two surround

back speakers are connected to the TX-DS787.

Sur L/R+Back: This outputs the sound to both the surround left

and right speakers and the surround back speaker.

Dolby D/6.1

This setting allows you to set whether or not Dolby Digital sources

will be played back using the matrix 6.1-channel output when a

surround back speaker is connected.

Auto: Automatically outputs signals with EX-identifying

signals using 6.1-channel Dolby Digital.

On: Outputs using 6.1-channel Dolby Digital regardless of

whether or not the signal contains EX identifiers.

Off: Does not output using 6.1-channel Dolby Digital

regardless of whether or not the signal contains EX identifiers

(Dolby D is used).

However, if the surround channel is monaural or nonexistent, the

playback is made using normal Dolby Digital regardless of the

above setting. For Dolby Digital 6.1-channel playback, Dolby D/6.1

is displayed for the listening mode.

DTS-ES

This setting allows you to set whether or not DTS sources will be

played back using the matrix 6.1-channel (DTS-ES) output when a

surround back speaker is connected.

Auto: Automatically outputs signals with ES-identifying

signals using DTS-ES playback.

On: Outputs using DTS-ES playback regardless of whether or

not the signal contains ES identifiers.

Off: Does not output using DTS-ES playback regardless of

whether or not the signal contains ES identifiers (DTS is used).

However, if the surround channel is monaural or nonexistent, the

playback is made using normal DTS regardless of the above setting.

For DTS-ES playback, DTS-ES is displayed for the listening mode.

Dolby D THX Surround EX

This setting allows you to set whether or not Dolby Digital sources

will be played back using THX Surround EX when a surround

back speaker is connected.

Auto: Automatically outputs signals with EX-identifying

signals using THX Surround EX.

On: Outputs using THX Surround EX regardless of whether or

not the signal contains EX identifiers.

Off: Does not output using THX Surround EX regardless of

whether or not the signal contains EX identifiers (Dolby D is

used).

However, if the surround channel is monaural or nonexistent, the

playback is made using normal THX regardless of the above

setting. For THX Surround EX playback, Dolby D THX Surround

EX is displayed for the listening mode.

DTS THX Surround EX

This setting allows you to set whether or not DTS sources will be

played back using the THX Surround EX when a surround back

speaker is connected.

On: Outputs using THX Surround EX regardless of whether or

not the signal contains ES identifiers.

Off: Does not output using THX Surround EX regardless of

whether or not the signal contains ES identifiers (DTS is used).

However, if the surround channel is monaural or nonexistent, the

playback is made using normal DTS regardless of the above

setting. For THX Surround EX playback, DTS THX Surround EX

is displayed for the listening mode.

Front Effect

Some live recordings contain acoustic reverberation. When you

play these sources, more reverberation will be applied by the DSP,

creating too much reverb effects and the sound loses frame or

presence. In this case, set this setting to “Off.” No reverberation

from the DSP will be applied to the sound output from the three

front channels, so the sound source is be played as it is without any

further reverberation.

Effect Level

This parameter allows you to adjust the strength of sound effects to

match the playback source material, the acoustics of your room,

and such other factors. This can be set to “Low,” “Mid-low,”

“Middle,” “Mid-high,” or “High.”

Room Size

This parameter allows you set virtual hall size to simulate for each

surround mode. You can choose from “Large,” “Mid-Large,”

“Middle,” “Mid-Small,” or “Small.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info