Bedienungsanleitung Onkyo TX-DS787 (Seite 45 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

4-2. Headphones Level sub-menu

You can use this sub-menu to adjust the volume output from the

headphones so that it matches the level output from the speakers.

The headphone volume can be adjusted between –12 and +12

decibels.

4-3. DTS LFE Level Setup sub-menu

This sub-menu is used to set the LFE level for the playback of DTS

sources. Normal playback is at 0 decibels; however, for some

music software where the bass sounds are played back at high

volumes, you can set this setting to –10 decibels.

Preference

1.Speaker Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

5.OSD Setup

|ENTER| Quit:|OSD|

4.Preference

1.Volume Setup

2.Headphones Level

3.DTS LFE Level Setup

4.Powered Zone2 Setup

|ENTER| Quit:|OSD|

4.Preference

1.Volume Setup

2.Headphones Level

3.DTS LFE Level Setup

4.Powered Zone2 Setup

|ENTER| Quit:|OSD|

4.Preference

1.Volume Setup

2.Headphones Level

3.DTS LFE Level Setup

|ENTER| Quit:|OSD|

1.Speaker Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

5.OSD Setup

|ENTER| Quit:|OSD|

4.Preference

1.Volume Setup

2.Headphones Level

3.DTS LFE Level Setup

4.Powered Zone2 Setup

|ENTER| Quit:|OSD|

4-1.Volume Setup

a.Volume Display

:Absolute

b.Maximum Volume

:Off

c.Power on Volume

:Last

Quit:|OSD|

4-1. Volume Setup sub-menu

This sub-menu allows you to make various settings concerning the

volume control of the TX-DS787.

a. Volume Display

You can choose from two ways of displaying the volume setting

on screen.

Absolute: This displays the volume with a minimum of min

(0) for no sound and a maximum of max (80). As a reference,

the volume setting of Ref (62) is used as the 0 -decibel for the

relative display method.

Relative: This displays the volume as a decibel value on a

scale with a designated reference point that is displayed as 0,

which equals the volume setting of 62 for the absolute display

method. With this display method, the minimum value is –∞,

the next highest is –61, and the maximum value is +18.

b. Maximum Volume

This setting allows you to set the maximum volume that can be

output with the MASTER VOLUME dial to prevent components

from being damaged by excessively loud volumes. For the

absolute volume display method, this can be set between 30 and

79. For the relative volume display method, this can be set

between –32 and +17 decibels.

c. Power On Volume

This sets a designated volume setting for the TX-DS787 to be set

every time that the power is turned on. This prevents the TX-

DS787 from being turned on while it is set to an extremely high

volume and suddenly output very loud sounds. For the absolute

volume display method, this can be set between min and max. For

the relative volume display method, this can be set between –∞

and +18 decibels. If you do not mind having the TX-DS787 turned

on with its current volume setting, set this to “Last.”

4. Preference menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info