Bedienungsanleitung Onkyo TX-DS787 (Seite 54 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Enjoying music or videos with the TX-DS787

If one of the messages shown below appears

If you try to perform an operation that is not possible, “Not

available” appears followed by one of the messages shown below

to explain the reason.

Enjoying the multichannel output

Before you can use a component with multichannel output, you

must first select “Yes” for the Multichannel setting in the OSD

menu for that input source: Input Setup → Audio Setup (see page

34). Also, select “Multichannel” using the Audio Selector button

on the front panel.

1. Press the input source button for the

component with multichannel output

connected to the MULTI CHANNEL INPUT on

the rear of the TX-DS787.

2. Turn on the connected component and start

playing the desired media.

3. If necessary, press the CH SEL button on the

remote controller to select an individual

speaker. Then press the LEVEL + or – button

to adjust the output level as desired.

Adjust the speaker output levels so that you can hear the same

sound level from each speaker at the listening position. For the

front right, front left, center, surround right, surround left,

surround back right and surround back left speakers, the

output levels can be adjusted between –12 to +12 decibels. The

subwoofer can be adjusted between –15 and +12 decibels.

4. Adjust the volume with the MASTER VOLUME

dial or the VOL buttons on the remote

controller.

Using the many features of the TX-DS787

Outputting from different input source:

You can have the TX-DS787 output the audio of one input

source through the speakers while the video of another input

source is output to the monitor (see page 36).

Assigning names to input sources:

You can enter a name for each input source so that when the

source is selected the name of that source is displayed in the

front display of the TX-DS787 (see page 57).

Temporarily changing the speaker output levels:

To change the individual speaker volumes temporarily, use the

remote controller and follow the procedure given below. Note

that the calibration settings will return to the original settings

when the TX-DS787 is put in standby.

1. Press the CH SEL button and select the desired speaker.

2. Press the LEVEL + or – button to adjust the volume level.

Using the sleep time:

To set the sleep timer, press the SLEEP button on the remote

controller and then set the time that you want the TX-DS787 to

enter the standby state (see page 59).

Temporarily turning off the sound:

To turn off the sound momentarily, such as when interrupted

by a phone call, press the MUTING button on the remote

controller (see page 59).

Adjusting the bass and treble:

You can adjust the bass and treble levels at the Tone Control

sub-menu of the OSD menu: Input Setup → Tone Control (see

page 40). You can also press the BASS/TREBLE button on the

front to display either “BASS” or “TREBLE” in the front

display (the display will change each time the button is

pressed) and turn the SSC dial to adjust the volume. This

function only affects the front left and right speakers, the

center speaker, and the subwoofer.

Adjusting the brightness of the front display:

You can adjust the brightness of the front display of the TX-

DS787 with DIMMER button on the remote controller or on

the TX-DS787 front panel with other than European models

(see page 9).

The operation is not allowed because headphones are plugged into

the TX-DS787.

The operation is not allowed because the selected input source is

set for multichannel input.

The operation is not allowed by the current speaker configuration.

The operation is not allowed because the Zone 2 mode is turned on.

No setting other than Dolby Digital can be set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info