Bedienungsanleitung Onkyo TX-L55 (Seite 47 von 63) (Englisch)

645294

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Advanced Operation

—Continued

This section explains how to record to an AV component

with recording capability.

Recording the Current Input Source

You can record the audio and video, or just the audio

from the current input source to an AV component con-

nected to the VIDEO 1 OUT and AUDIO VIDEO 1 OUT

sockets.

Notes:

•You cannot record audio from a component that’s con-

nected to a DIGITAL INPUT. You must use an analog

audio input.

• Surround sound and DSP listening mode effects

cannot be recorded.

•You cannot record from a component that’s connected

to the DVD multichannel input.

• If you select another input source while recording, that

source will be recorded instead.

• Copy-protected DVDs cannot be recorded.

• DTS signals will be recorded as noise, so don’t try and

record from DTS CDs or LDs.

Recording from Separate AV Sources

You can record audio and video from two separate

sources, allowing you to overdub audio onto your video

recordings. This works because when an audio-only

input source (i.e., TUNER, TV, or AUX) is selected, the

video input source remains the same. For example, if you

select the VIDEO 2 input source, followed by the AUX

input source, you can watch video from the VIDEO 2

input while listening to audio from the AUX input.

In the following example, audio from a CD player con-

nected to the AUX IN sockets, and video from a cam-

corder connected to the VIDEO 2 IN socket are recorded

by a VCR, which is connected to the VIDEO 1 OUT

sockets.

Notes:

• Audio from only the TUNER, TV, VIDEO 2, and

AUX input sources can be recorded.

Recording

Use the INPUT [ ]/[ ] buttons

to select the input source that

you want to record.

Audio signals from the selected input

source are output by the AUDIO

VIDEO 1 OUT sockets.

Video signals from the selected input

source are output by the VIDEO 1 OUT

sockets.

You can listen to and watch the selected

input source while recording. The

TX-L55’s MASTER VOLUME control

has no effect on recording.

Start recording on the AV compo-

nent connected to the VIDEO 1

OUT sockets.

Start playback on the source

component.

MASTER VOLUME

INPUT

10 0

CLEAR

123

456

789

--/---

INPUT

ENTER

DSP

STEREO

SURR

DIRECT

VOL

DVD

AMP

TV AUX

TUN

DVD

INPUT SELECTOR

DISC

TONE

REMOTE

MODE

TUNER

DISPLAY

INPUT

DIMMER SLEEP

RANDOM

SP A SP B

MUTING

EXIT GUIDE

ANGLE

SUBTITLEAUDIO

MEMORYA

BREPEAT

ON STANDBY

TV CH

V VOL

LAST M

PLAY MODE

INPUT

SELECTOR

TV AUX

TUN

DVD

INPUT SELECTOR

Remote

controller

Prepare the camcorder and CD

player for playback.

Prepare the VCR for recording.

Select the VIDEO 2 input source.

This selects the camcorder as the video

source.

Select the AUX input source.

This selects the CD player as the audio

source, but leaves the camcorder as the

video source.

Start recording on the VCR and

start playback on the camcorder

and CD player.

The video from the camcorder and the

audio from the CD player are recorded

by the VCR.

TX-L55_En.book Page 47 Tuesday, June 1, 2004 9:02 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-L55 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info