Bedienungsanleitung Onkyo TX-L55 (Seite 60 von 63) (Englisch)

645294

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Troubleshooting

—Continued

There’s no sound with a certain signal format?

• Check the input signal format setting. Depending on

the input source, you can select Auto, Multich, Ana-

log, DTS, or PCM (page 51).

• Check the digital audio output setting on the source

component. On some games consoles, such as those

that play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an

audio output format from a menu.

• Depending on the input signal, some listening modes

cannot be selected (page 42).

Can’t select the DTS-ES Discrete/Matrix or THX

Surround EX listening modes?

• These modes cannot be selected when no surround

back speakers are connected.

The volume won’t go up to 79?

• When the levels of all speakers have been calibrated

(page 30), the maximum volume setting may change.

Noise can be heard?

• Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

• An audio cable may be picking up interference. Try

repositioning your cables.

The Late Night function doesn’t work?

• Make sure the source material is Dolby Digital

(page 44).

The DVD multichannel input doesn’t work?

• Check the DVD MULTI CH IN connections

(page 24).

• Set the audio input signal format to Multich (page 51).

About DTS signals

• When DTS playback ﬁnishes and the DTS bitstream

stops, the TX-L55 remains in DTS listening mode and

the DTS indicator remains on. This is to prevent noise

when you use the pause, fast forward, or fast reverse

function on your player. If you switch your player

from DTS to PCM, because the TX-L55 does not

switch formats immediately, you may not hear any

sound, in which case you should stop your player for

about three seconds, and then resume playback.

•With some CD and LD players, you won’t be able to

playback DTS material properly even though your

player is connected to a digital input on the TX-L55.

This is usually because the DTS bitstream has been

processed (e.g., output level, sampling rate, or fre-

quency response changed) and the TX-L55 doesn’t

recognize it as a genuine DTS signal. In such cases,

you may hear noise.

• When playing DTS material, using the pause, fast for-

ward, or fast reverse function on your player may pro-

duce a short audible noise. This is not a malfunction.

There’s no picture?

• Make sure that all video connecting plugs are pushed

in all the way (page 20).

• Make sure that each video component is properly con-

nected.

• The TX-L55 doesn’t convert between video formats.

It works as a video signal switcher. Composite video

input signals are output only by the composite video

output. S-Video input signals are output only by the

S-Video output. And component video input signals

are output only by the component video outputs.

• On your TV, make sure that the video input to which

the TX-L55 is connected is selected.

Reception is noisy, FM stereo reception is

noisy, or the FM STEREO indicator doesn’t

appear?

• Relocate your antenna.

•Move the TX-L55 away from your TV or computer.

•Try using the AUTO FM mode (page 36).

•Passing cars and airplanes can cause interference.

• Concrete walls weaken radio signals.

• If none of the above improves reception, install an out-

door antenna.

The remote controller doesn’t work?

• Make sure that the batteries are installed with the cor-

rect polarity (page 7).

• Install new batteries. Don’t mix different types of bat-

teries or old and new batteries (page 7).

• Make sure that the remote controller is not too far

away from the TX-L55, and that there’s no obstruction

between the remote controller and the TX-L55’s

remote control sensor (page 7).

Video

Tuner

Remote Controller

TX-L55_En.book Page 60 Tuesday, June 1, 2004 9:02 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-L55 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info