Bedienungsanleitung Onkyo TX-NR 717 (Seite 67 von 148) (Englisch)

492647

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Advanced Operations

En-67

HDMI

■ HDMI Control(RIHD)

` Off

` On

Turn this setting on to allow

p-compatible

components connected via HDMI to be controlled by the

AV receiver (➔ page 93).

Note

• When the setting is set to “On” and the menu is closed, the names

of connected p-compatible components and “RIHD On”

are displayed on the AV receiver.

“Search…” → “(name)” → “RIHD On”

When the AV receiver cannot receive the name of the component,

it is displayed as “Player

” or “Recorder

”, etc. (“

” shows up

and indicates the number of components, when two or more are

received).

•When an p-compatible component is connected to the

AV receiver via an HDMI cable, the name of the connected

component is displayed on the AV receiver display. For example,

while you are watching TV broadcasting, if you operate a Blu-ray

Disc/DVD player (being powered on) with the remote control of

the AV receiver, the name of the Blu-ray Disc/DVD player will

be displayed on the AV receiver.

• Set it to

“Off” when a connected piece of equipment is not

compatible or it is unclear whether the equipment is compatible

or not.

• If operation is not normal when set to

“On”, change the setting to

“Off”.

• Refer to the connected component’s instruction manual for

details.

•When the “HDMI Control(RIHD)” setting is set to “On”, the

power consumption on standby mode slightly increases.

(Depending on the TV status, the AV receiver will enter standby

mode as usual.)

•The p control does not support HDMI OUT SUB. Use

HDMI OUT MAIN instead.

• When the source equipment is connected with the u

connection, it may malfunction if “HDMI Control(RIHD)” is

set to “On”.

■ HDMI Through

` Off

` BD/DVD, CBL/SAT, STB/DVR, GAME, PC, AUX,

TV/CD, PHONO:

Selects the input source for which the HDMI

Through function is enabled.

` Last:

The HDMI Through function is activated on the input

source selected at the time of setting the AV receiver

to standby mode.

When enabling the HDMI Through function, regardless of

whether the AV receiver is on or in standby, both audio

and video streams from an HDMI input will be output to

the TV or other components via HDMI connection. The

HDMI indicator will be dimly-lit in standby mode. Note

that the indicator may not light under certain conditions

(

➔ page 52).

This setting is fixed to “Auto” automatically when the

above “HDMI Control(RIHD)” setting is set to “On”,

resulting in automatic input source selection.

Note

• Only an input source assigned to an HDMI IN via “HDMI Input”

setting is enabled (➔ page 53).

• The power consumption in standby mode will increase during the

HDMI Through function; however in the following cases, the

power consumption can be saved:

– The TV is in standby mode.

– You are watching a TV program.

• Refer to the connected component’s instruction manual for

details.

• Depending on the connected component, the correct input source

may not be selected with the setting fixed to “Auto”.

• This setting is set to “Off” automatically when the “HDMI

Control(RIHD)” setting is set to “Off”.

■ Audio TV Out

` Off

` On

This preference determines whether the incoming audio

signal is output from the HDMI output. You may want to

turn this preference on if your TV is connected to the

HDMI output and you want to listen to the audio from a

connected component through your TV’s speakers.

Normally, this should be set to “Off”.

Note

• If “On” is selected and the audio can be output from the TV, the

AV receiver will output no sound through its speakers. In this

case, “TV Speaker” appears on the AV receiver’s display by

pressing DISPLAY.

• When “HDMI Control(RIHD)” is set to “On”, this setting is

fixed to “Auto”.

• With some TVs and input signals, no sound may be output even

when this setting is set to “On”.

• When “Audio TV Out” or

“HDMI Control(RIHD)” is set to

“On” and you’re listening through your TV’s speakers

(➔ page 16), turning up the AV receiver’s volume control will

make the sound be output from the AV receiver’s front left and

right speakers. To stop the AV receiver’s speakers producing

sound, change the settings, change your TV’s settings, or turn

down the AV receiver’s volume.

• Listening mode cannot be changed when this setting is set to

“On” and the input source is not HDMI.

■ Audio Return Channel (ARC)

` Off

` Auto:

The audio signal from your TV tuner can be sent to

HDMI OUT MAIN of the AV receiver.

The audio return channel (ARC) function allows an ARC

capable TV to send the audio stream to HDMI OUT MAIN

of the AV receiver. To use this function, you must select

the TV/CD input selector and your TV must be ARC

capable. Default setting: “----”

To be continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR 717 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR 717

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info