Bedienungsanleitung Onkyo TX-NR3008 (Seite 36 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

You can store a combination of up to 40 of your favorite

FM/AM radio stations as presets.

Note

• You can name your radio presets for easy identification (➔ 59).

Its name is displayed instead of the band and frequency.

Selecting Presets

Tip

• You can also use the remote controller’s number buttons to select

a preset directly.

Deleting Presets

When tuned into an RDS station, the RDS indicator lights.

What is RDS?

RDS stands for Radio Data System and is a method of

transmitting data in FM radio signals. It was developed by

the European Broadcasting Union (EBU) and is available

in most European countries. Many FM stations use it these

days. In addition to displaying text information, RDS can

also help you find radio stations by type (e.g., news, sport,

rock, etc.).

The AV receiver supports four types of RDS information:

■ PS (Program Service)

When tuned to an RDS station that’s broadcasting PS

information, the station’s name will be displayed. Press-

ing DISPLAY will display the frequency for 3 seconds.

■ RT (Radio Text)

When tuned to an RDS station that’s broadcasting text

information, the text will be shown on the display as

described in the next section.

■ PTY (Program Type)

This allows you to search for RDS radio stations by type

(➔ 37).

■ TP (Traffic Program)

This allows you to search for RDS radio stations that

broadcast traffic information (➔ 37).

Note

• In some cases, the text characters displayed on the AV receiver

may not be identical to those broadcast by the radio station. Also,

unexpected characters may be displayed when unsupported

characters are received. This is not a malfunction.

• If the signal from an RDS station is weak, RDS data may be

displayed intermittently or not at all.

When tuned to an RDS station that’s broadcasting text

information, the text can be displayed.

Displaying Radio Text (RT)

Note

• The message “Waiting” may appear while the AV receiver waits

for the RT information.

• If the message “No Text Data” appears on the display, no RT

information is available.

Presetting FM/AM Stations

Tune into the FM/AM station that you want to

store as a preset.

See the previous section.

Press MEMORY.

The preset number flashes.

(Actual display depends on the country.)

While the preset number is flashing (about 8 sec-

onds), use PRESET e/r to select a preset from 1

through 40.

Press MEMORY again to store the station or chan-

nel.

The station or channel is stored and the preset num-

ber stops flashing.

Repeat this procedure for all of your favorite FM/

AM radio stations.

To select a preset, use PRESET e/r on the AV

receiver, or the remote controller’s CH +/–.

Select the preset that you want to delete.

See the previous section.

While holding down MEMORY, press TUNING

MODE.

The preset is deleted and its number disappears from

the display.

Using RDS (excluding North American

models)

RDS works only in areas where RDS broadcasts are

available.

Press RT/PTY/TP once.

The RT information scrolls across the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info