Bedienungsanleitung Onkyo TX-NR3008 (Seite 47 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Explanatory Notes

Main Menu Input/Output Assign

Monitor Out

On the “Monitor Out” settings, you can select whether or

not to have the video sources’ images output through the

HDMI output, as well as whether to have the onscreen

setup menu output through the HDMI output or through

an analog output.

If you connect your TV to HDMI output, “Monitor Out”

setting is automatically set so that the onscreen setup

menus are displayed and composite video, S-Video, and

component video sources are upconverted

and output.

If you connect your TV to the COMPONENT VIDEO

MONITOR OUT (not the HDMI output), “Monitor Out”

setting is automatically set so that the onscreen setup

menus are displayed and composite video and S-Video

sources are upconverted

and output.

Note

• See “Video Connection Formats” (➔ 25) for charts showing

how the “Monitor Out” and “Resolution” settings (➔ 48)

affect the video signal flow through the AV receiver.

■ Monitor Out

` Analog:

Select this if your TV is connected to the COMPO-

NENT VIDEO MONITOR OUT, MONITOR OUT

S, or MONITOR OUT V.

` HDMI Main

Select this if your TV is connected to the HDMI

OUT MAIN.

` HDMI Sub:

Select this if your TV is connected to the HDMI

OUT SUB.

` Both:

Select this if your TVs are connected to the HDMI

OUT MAIN and HDMI OUT SUB. Video signals

are output from both HDMI outputs at the resolution

supported by both TVs.

` Both(Main):

Select this if your TVs are connected to the HDMI

OUT MAIN and HDMI OUT SUB. Video signals

are output from both HDMI outputs but HDMI OUT

MAIN will become a priority; depending on the reso-

lution, video signals may not be output from HDMI

OUT SUB.

` Both(Sub):

Select this if your TVs are connected to the HDMI

OUT MAIN and HDMI OUT SUB. Video signals

are output from both HDMI outputs but HDMI OUT

SUB will become a priority; depending on the reso-

lution, video signals may not be output from HDMI

OUT MAIN.

Note

• If not connected to the same output you have selected in the

“Monitor Out” setting, the “Monitor Out” setting will be auto-

matically switched to “Analog” (➔ 26).

• When you select other than “Analog”, the onscreen setup menus

are output by only the HDMI output. If you’re not using the

HDMI output and select settings by mistake and the menus

disappear, press AV receiver’s MONITOR OUT to select

“Analog”.

• For Deep Color output, if the “Monitor Out” setting is set to

“Both(Main)” or “Both(Sub)”, the number of bit may be lim-

ited due to the capability of your TV connected to a priority out-

put.

Changing “Monitor Out” setting manually

Input/Output Assign

a Menu selection

b Setting target

c Setting options (default setting underlined)

Main Menu Speaker Setup

■ Subwoofer

` 1ch:

Audio signal is outputted from SW1 jack

only.

` 2ch

Audio signal is outputted from SW1 and

SW2 jacks.

OUT

Composite video, S-Video,

component video

Composite video, S-Video,

component video

HDMI

OUT

Composite video, S-Video

Component video

Press MONITOR OUT on the front panel.

The current setting is displayed.

Press MONITOR OUT on the AV receiver

repeatedly to select:

` Analog, HDMI Main, HDMI Sub, Both,

Both(Main) or Both(Sub)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info