Bedienungsanleitung Onkyo TX-NR3008 (Seite 48 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

■ Resolution

You can specify the output resolution for the HDMI

output

and COMPONENT VIDEO MONITOR OUT and have

the AV receiver upconvert the picture resolution as neces-

sary to match the resolution supported by your TV.

` Through

Select this to pass video through the AV receiver at

the same resolution and with no conversion.

` Auto

Select this to have the AV receiver automatically

convert video at resolutions not supported by your

TV.

` 480p (480p/576p):

Select this for 480p or 576p output and video con-

version as necessary.

` 720p:

Select this for 720p output and video conversion as

necessary.

` 1080i:

Select this for 1080i output and video conversion as

necessary.

` 1080p

Select this for 1080p output and video conversion as

necessary.

` 1080p/24

Select this for 1080p output at 24 frames per second

and video conversion as necessary.

` Source:

Output will be according to the resolution level

which was set in the “Picture Adjust” setting

(➔ 60).

Tip

•The “Resolution” setting is set respectively of main, sub, and

analog.

Note

•If the “Monitor Out” setting is set to “Both”, this setting is fixed

at “Auto”.

• Depending on the incoming video signal, video playback may

not be smooth or the vertical resolution may be lowered. In this

case select other than “1080p/24”.

PC IN (Analog RGB) input signal is output at 480p (480p/

576p), 720p, 1080i resolution when the “Monitor Out” set-

ting is set to “Analog” (➔ 47) and the “Resolution” setting is

set to “Through”.

These settings are not available when the “Monitor Out” set-

ting is set to “Analog” (➔ 47).

HDMI Input

If you connect a video component to an HDMI input, you

must assign that input to an input selector. For example, if

you connect your Blu-ray Disc/DVD player to HDMI

IN 2, you must assign “HDMI 2” to the “BD/DVD” input

selector.

If you’ve connected your TV to the AV receiver with an

HDMI cable, composite video, S-video and component

video sources can be upconverted

and output by the

HDMI output

. You can set this for each input selector by

selecting the “-----” option.

This applies only when “Monitor Out” setting is set to other

than “Analog” (➔ 47).

Here are the default assignments.

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, TAPE,

TV/CD, PHONO, PORT

` HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5,

HDMI 6, HDMI 7:

Select the HDMI IN to which the video component

has been connected.

` -----:

Output composite video, S-Video, and component

video sources from the HDMI output. The video out-

put signal from the HDMI output is the one config-

ured in “Component Video Input” (➔ 49).

•“AUX” is used only for input from the front panel.

• Each HDMI input cannot be assigned to two input selec-

tors or more. When HDMI 1 - HDMI 7 have already

been assigned, you must set first any unused input selec-

tors to “-----” or you will be unable to assign HDMI 1

- HDMI 7 to input selector.

Input selector Default assignment

BD/DVD HDMI 1

VCR/DVR HDMI 2

CBL/SAT HDMI 3

GAME HDMI 4

PC HDMI 5

AUX FRONT (Fixed)

TAPE -----

TUNER ----- (Fixed)

TV/CD -----

PHONO -----

PORT -----

OUT

Composite video, S-Video,

component video

Composite video, S-Video,

component video

HDMI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info