Bedienungsanleitung Onkyo TX-NR3008 (Seite 50 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Digital Audio Input

If you connect a component to a digital audio input, you

must assign that input to an input selector. For example, if

you connect your CD player to the OPTICAL IN 1, you

must assign “OPT 1” to the “TV/CD” input selector.

Here are the default assignments.

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, TAPE,

TV/CD, PHONO, PORT

` COAX 1, COAX 2, COAX 3, OPT 1, OPT 2,

OPT 3 (TX-NR5008):

Select a corresponding digital audio input that the

component has been connected.

` -----:

Select if the component is connected to an analog

audio input.

•“AUX” is used only for input from the front panel.

Note

• When an HDMI IN is assigned to an input selector in “HDMI

Input” (➔ 48), the same HDMI IN will be set as a priority in this

assignment. In this case, if you want to use the coaxial or optical

audio input, make the selection in the “Audio Selector” in the

Home menu (➔ 68).

• Available sampling rate for PCM signals from a digital input

(optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

•“TUNER” selector cannot be assigned and is fixed at the

“-----” option.

• If you connect a component (such as UP-A1 Dock that seated

iPod) to the UNIVERSAL PORT jack, you cannot assign any

input to “PORT” selector.

Analog Audio Input

If you connect a component to the AV receiver’s analog

multichannel input, you must assign that input to an input

selector. For example, if you connect your Blu-ray Disc/

DVD player to the MULTI CH input, you must assign it to

the “BD/DVD” input selector.

■ Multich

` BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,

TAPE, TV/CD, PHONO

You can assign the multichannel input to the input

selectors.

` -----:

If you don’t want to assign the multichannel input,

set to “-----”.

Note

• To listen to the component connected to the multichannel input,

make the selection in the “Audio Selector” in the Home menu

(➔ 68).

■ Subwoofer Input Sensitivity

` 0dB

to 15dB in 5 dB step.

Some DVD players output the LFE channel from their

analog subwoofer output at 15 dB higher than normal.

With this setting, you can change the AV receiver’s sub-

woofer sensitivity to match your DVD player.

Note

• This setting only affects signals connected to the AV receiver’s

multichannel input SUBWOOFER jack.

• If you find that your subwoofer is too loud, try the 10 dB or

15 dB setting.

Main menu Speaker Setup

Here you can check the settings made by

Audyssey MultEQ XT32 Room Correction and Speaker

Setup, or set them manually, which is useful if you change

one of the connected speakers after using

Audyssey MultEQ XT32 Room Correction and Speaker

Setup.

Press RECEIVER and use SP LAYOUT on the remote

controller to select Speakers A or Speakers B.

Note

• These settings are disabled when:

– a pair of headphones is connected, or

–the “Audio TV Out” setting is set to “On” (➔ 64) and an

input selector other than HDMI is selected.

Speaker Settings

If the impedance of any speaker is 4 ohms or more but less

than 6, set the minimum speaker impedance to 4 ohms.

To use bi-amping or bridging, you must change the

“Speakers Type(Front A)” or “Speakers Type(Front

B)” setting (➔ 51). For details on speaker wire connec-

tion, see “Connecting the AV Receiver” (➔ 17 to 19).

Note

• When bridging is used, the AV receiver is able to drive up to 7.2

speakers in the main room.

• When bi-amping is used, the AV receiver is able to drive up to

7.2 speakers in the main room.

• Before you change these settings, turn down the volume.

Input selector Default assignment

BD/DVD COAX 1

VCR/DVR COAX 2

CBL/SAT COAX 3

GAME OPT 1

PC -----

AUX FRONT (Fixed)

TAPE -----

TUNER ----- (Fixed)

TV/CD OPT 2

PHONO -----

PORT -----

Speaker Setup

Some of the settings in this section are set automatically

by Audyssey MultEQ

XT32 Room Correction and

Speaker Setup (➔ 32). For Speakers B, you need to

change the settings manually.

If you change these settings, you must run

Audyssey MultEQ XT32 Room Correction and

Speaker Setup again (➔ 32).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info