Bedienungsanleitung Onkyo TX-NR3008 (Seite 56 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

■ Volume Leveler

` Off:

Volume Leveler off.

` Low:

Low Compression Mode becomes active.

` Mid:

Medium Compression Mode becomes active.

` High

High Compression Mode becomes active. This set-

ting affects volume the most, causing all sounds to

be of equal loudness.

“Volume Level er” maintains the perceived loudness of all

content for example, from different channels or input

sources.

Note

•If the “Dolby Volume” setting is set to “Off”, this setting cannot

be selected.

■ Half Mode

` Off:

Half Mode off.

` On

Half Mode on.

The Half Mode parameter turns Dolby Volume Half Mode

processing ON and OFF.

In OFF mode, Dolby Volume applies a bass and treble

attenuation to the audio when the system gain exceeds ref-

erence level. This enables a more perceptually flat listen-

ing experience as human ears are more sensitive to bass

and treble at higher levels. Some listeners however, prefer

to have more bass and treble performance at higher gain

levels.

Note

•If the “Dolby Volume” setting is set to “Off”, this setting cannot

be selected.

• During Half Mode ON playback, Dolby Volume does not apply

a bass and treble attenuation when the system volume exceeds

reference level thereby boosting perception of high and low fre-

quencies.

DTS

■ Neo:6 Music

Center Image

` 0 to 2

to 5

The DTS Neo:6 Music listening mode creates 6-channel

surround sound from 2-channel stereo sources. With

this setting, you can specify by how much the front left

and right channel output is attenuated in order to create

the center channel.

Setting a value “0” in the middle is set to hear a sound.

Sound is spread in left and right (the outside) so that the

set value is made big. Please adjust by liking.

Audyssey DSX™

■ Soundstage

` –3dB to Reference

to +3dB

With this setting, you can adjust the soundstage when using

Audyssey DSX™.

Note

•If the “Center” setting is set to “None”, or both “Front High”

and “Front Wide” settings are set to “None” (➔ 52), this setting

cannot be selected.

•“Soundstage” settings cannot be adjusted while Speakers B is

selected.

Theater-Dimensional

■ Listening Angle

` Wide

Select if the listening angle is greater than 30

degrees.

` Narrow:

Select if the listening angle is less than 30 degrees.

With this setting, you can optimize the Theater-Dimen-

sional listening mode by specifying the angle of the

front left and right speakers relative to the listening

position. Ideally, the front left and right speakers should

be equidistant from the listening position and at an

angle close to one of the two available settings.

LFE Level

■ Dolby Digital

, DTS

, Multich PCM, Dolby

TrueHD, DTS-HD Master Audio, DSD

` –QdB, –20dB, –10dB, or 0dB

With these settings, you can set the level of the LFE (Low

Frequency Effects) channel individually for each input

sources.

If you find that low-frequency effects are too loud when

using one of these sources, change the setting to –20 dB or

–Q dB.

Dolby Digital and Dolby Digital Plus sources.

DTS and DTS-HD High Resolution Audio sources.

DSD (Super Audio CD) sources.

Front left speaker Front right speaker

Listening angle: 30°

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info