Bedienungsanleitung Onkyo TX-NR3008 (Seite 55 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Input Channel

` Left + Right

Both the left and right channels are output.

` Left:

Only the left channel is output.

` Right:

Only the right channel is output.

Output Speaker

` Center

Mono audio is output by the center speaker.

` Left / Right:

Mono audio is output by the front left and right

speakers.

This setting determines which speakers output mono

audio when the Mono listening mode is selected.

Note

•If the “Center” setting is set to “None” (➔ 52), this setting is

fixed at “Left / Right”.

Dolby

■ PLIIx Music (2ch Input)

These settings apply to only 2-channel stereo sources.

If you’re not using any surround back speakers, these

settings apply to Dolby Pro Logic II, not Dolby Pro

Logic IIx.

Panorama

` On:

Panorama function on.

` Off

Panorama function off.

With this setting, you can broaden the width of the front

stereo image when using the Dolby Pro Logic IIx Music

listening mode.

Dimension

` –3 to 0

to +3

With this setting, you can move the sound field forward

or backward when using the Dolby Pro Logic IIx Music

listening mode. Higher settings move the sound field

backward. Lower settings move it forward.

If the stereo image feels too wide, or there’s too much

surround sound, move the sound field forward to

improve the balance. Conversely, if the stereo image

feels like it’s in mono, or there’s not enough surround

sound, move it backward.

Center Width

` 0 to 3

to 7

With this setting, you can adjust the width of the sound

from the center speaker when using the Dolby Pro

Logic IIx Music listening mode. Normally, if you’re

using a center speaker, the center channel sound is out-

put by only the center speaker. (If you’re not using a

center speaker, the center channel sound will be distrib-

uted to the front left and right speakers to create a phan-

tom center). This setting controls the front left, right,

and center mix, allowing you to adjust the weight of the

center channel sound.

■ PLIIz Height Gain

The Height Gain Control in Dolby Pro Logic IIz

enables the listener to select how much gain is applied

to the front high speakers. There are three settings,

“Low”, “Mid” and “High”, and the front high speakers

are accentuated in that order. While “Mid” is the default

listening setting, the listener may adjust the Height Gain

Control to their personal preference.

` Low:

Low PLIIz Height Gain becomes active.

` Mid

Medium PLIIz Height Gain becomes active.

` High:

High PLIIz Height Gain becomes active.

Note

• If the “Front High” settings is set to “None” (➔ 52), this setting

cannot be selected.

■ Dolby EX

This setting determines how Dolby EX encoded signals

are handled. This setting is unavailable if no surround

back speakers are connected. This setting is effective

with Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only.

` Auto:

If the source signal contains a Dolby EX flag, the

Dolby EX or THX Surround EX listening mode is

used.

` Manual:

You can select any available listening mode.

Note

• If the “Surround Back” setting is set to “None” (➔ 52), this

setting cannot be selected.

• If the “Front High” or “Front Wide” setting is enabled (➔ 52),

this setting is fixed at “Manual”.

■ Dolby Volume

` Off

Dolby Volume off.

` On:

Dolby Volume on.

Dolby Volume automatically adjusts the difference in vol-

ume levels which can occur between different content or

source components, freeing the user from having to make

volume adjustments. Also, by adjusting the frequency bal-

ance according to the playback volume, it recreates the

original source audio. Dolby Volume therefore provides

comfortable listening, effectively controlling the volume

level difference without unnatural changes in volume or

sound quality to recreate the balance and nuance of the

source audio.

Note

• When the “Dolby Volume” setting is set to effective,

Audyssey Dynamic EQ and Audyssey Dynamic Volume will be

set to “Off” and “Equalizer” setting will be set to “Off” from

“Audyssey” or remain set to “Manual”.

• If you would like to use Dolby Volume in THX listening modes,

set “Loudness Plus” setting to “Off” and set “Preserve THX

Settings” setting to “No”.

• When the “Dolby Volume” is set to “On”, the Late Night func-

tion cannot be set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info