Bedienungsanleitung Onkyo TX-NR3008 (Seite 101 von 116) (Englisch)

553767

101

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

101

■ The beginning of audio received by an HDMI IN

can’t be heard

■ There’s no picture

■ There’s no picture from a source connected to

an HDMI IN

■ The on-screen menus don’t appear

■ The picture is distorted

■ The on screen display does not appear

■ Reception is noisy, FM stereo reception is

noisy, or the FM STEREO indicator doesn’t light

■ The remote controller doesn’t work

With some CD and LD players, you won’t be able to

playback DTS material properly even though your

player is connected to a digital input on the AV

receiver. This is usually because the DTS bitstream

has been processed (e.g., output level, sampling rate,

or frequency response changed) and the AV receiver

doesn’t recognize it as a genuine DTS signal. In such

cases, you may hear noise.

—

When playing DTS program material, using the

pause, fast forward, or fast reverse function on your

player may produce a short audible noise. This is not

a malfunction.

—

Since it takes longer to identify the format of an

HDMI signal than it does for other digital audio sig-

nals, audio output may not start immediately.

—

Video

Make sure that all video connecting plugs are pushed

in all the way.

Make sure that each video component is properly

connected.

21, 22,

If your TV is connected to the HDMI output, set the

“Monitor Out” setting other than “Analog”, and

select “-----” in the “HDMI Input” to watch com-

posite video, S-Video, and component video sources.

47, 48

If your TV is connected to the COMPONENT

VIDEO MONITOR OUT, MONITOR OUT S, or

MONITOR OUT V, set the “Monitor Out” setting

to “Analog”, and select “-----” in the “Compo-

nent Video Input” to watch composite video and

S-Video sources.

47, 49

If the video source is connected to a component

video input, you must assign that input to an input

selector, and your TV must be connected to either

the HDMI output or COMPONENT VIDEO MON-

ITOR OUT.

22, 49

If the video source is connected to a composite video

input, your TV must be connected to the HDMI out-

put or the corresponding composite video output.

If the video source is connected to an HDMI input,

you must assign that input to an input selector, and

your TV must be connected to the HDMI output.

21, 48

While the Pure Audio listening mode is selected, the

video circuitry is turned off and only video signals

input through HDMI IN can be output.

—

On your TV, make sure that the video input to which

the AV receiver is connected is selected.

—

If you selected “Both(Main)” or “Both(Sub)” in the

“Monitor Out” setting, no picture may appear on

your TV that is connected to a secondary HDMI out-

put (not a priority HDMI output). In this case,

change the setting to “Both”.

—

Reliable operation with an HDMI-to-DVI adapter is

not guaranteed. In addition, video signals from a PC

are not guaranteed.

109

When the “Monitor Out” setting is set to “Analog”,

and the “Resolution” setting is set to anything other

than “Through”, no video is output by the HDMI

outputs.

When the “Resolution” is set to any resolution not

supported by the TV, no video is output by the

HDMI outputs.

If the message “Resolution Error” appears on the

AV receiver’s display, this indicates that your TV

does not support the current video resolution and

you need to select another resolution on your DVD

player.

—

(European and Asian models) Specify the TV sys-

tem used in your area in the “TV Format”.

On your TV, make sure that the video input to which

the AV receiver is connected is selected.

—

If your TV is connected to the analog outputs, set the

“Monitor Out” setting to “Analog”.

(European and Asian models) Specify the TV sys-

tem used in your area in the “TV Format”.

If you select other than “Analog” in the “Monitor

Out” setting, the immediate display will not appear

when the input signal from the COMPONENT

VIDEO IN is output to a device connected to the

COMPONENT VIDEO MONITOR OUT.

Depending on the input signal, the on screen display

may not appear when the input signal from the

HDMI IN is output to a device connected to the

HDMI output.

Tuner

Relocate your antenna. —

Move the AV receiver away from your TV or com-

puter.

—

Listen to the station in mono. 35

When listening to an AM station, operating the

remote controller may cause noise.

—

Passing cars and airplanes can cause interference. —

Concrete walls weaken radio signals. —

If nothing improves the reception, install an outdoor

antenna.

—

Remote Controller

Before operating this unit, be sure to press

RECEIVER.

—

Make sure that the batteries are installed with the

correct polarity.

Install new batteries. Don’t mix different types of

batteries, or old and new batteries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info