Bedienungsanleitung Onkyo TX-NR3008 (Seite 102 von 116) (Englisch)

553767

102

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

102

■ Can’t control other components

■ Can’t learn commands from another remote

controller

■ Can’t record

■ The Zone 2/3 speakers produce no sound

■ Can’t access the server or Internet radio

■ Playback stops while listening to music files on

the server

■ Can’t connect to the AV receiver from a Web

browser

■ Can’t access the music files on a USB device

Make sure that the remote controller is not too far

away from the AV receiver, and that there’s no

obstruction between the remote controller and the

AV receiver’s remote control sensor.

Make sure that the AV receiver is not subjected to

direct sunshine or inverter-type fluorescent lights.

Relocate if necessary.

—

If the AV receiver is installed in a rack or cabinet

with colored-glass doors, the remote controller may

not work reliably when the doors are closed.

—

Make sure you’ve selected the correct remote con-

troller mode.

11, 94

When using the remote controller to control other

manufacturers’ AV components, some buttons may

not work as expected.

—

Make sure you’ve entered the correct remote control

code.

Make sure to set the same ID on both the AV receiver

and remote controller.

If it’s an Onkyo component, make sure that the u

cable and analog audio cable are connected properly.

Connecting only an u cable won’t work.

Make sure you’ve selected the correct remote con-

troller mode.

11, 94

If you’ve connected an u-capable Onkyo MD

recorder, CD recorder, RI Dock to the TAPE IN/

OUT jacks, or an RI Dock to the GAME IN or VCR/

DVR IN jacks, for the remote controller to work

properly, you must set the input display.

If you cannot operate it, you will need to enter the

appropriate remote control code.

To control another manufacturer’s component, point

the remote controller at that component.

If none of the codes work, use the Learning function

to learn the commands of the other component’s

remote controller.

To control an Onkyo component that’s connected via

u, point the remote controller at the AV receiver.

Be sure to enter the appropriate remote control code

first.

To control an Onkyo component that’s not connected

via u, point the remote controller at the compo-

nent. Be sure to enter the appropriate remote control

code first.

The entered remote control code may not be correct.

If more than one code is listed, try each one.

—

When learning commands, make sure that the trans-

mitting ends of both remote controllers are pointing

at each other.

—

Are you trying to learn from a remote controller that

cannot be used for learning? Some commands can-

not be learned, especially those that contain several

instructions.

—

Recording

On your recorder, make sure the correct input is

selected.

—

To prevent signal loops and damage to the AV

receiver, input signals are not fed through to outputs

with the same name (VCR/DVR IN to VCR/DVR

OUT).

—

When the Pure Audio listening mode is selected,

recording is not possible because no video signals

are output. Select another listening mode.

—

Zone 2/3

To use the Zone 2 speakers, you must set the “Pow-

ered Zone 2” setting to “Act”.

To use the Zone 3 speakers, you must set the “Pow-

ered Zone 3” setting to “Act”.

Music Server and Internet Radio

Check the network connection between the AV

receiver and your router or switch.

—

Make sure that your modem and router are properly

connected, and make sure they are both turned on.

—

Make sure the server is up and running and compati-

ble with the AV receiver.

Check the “Network Settings”. 76

Make sure your server is compatible with the AV

receiver.

If you download or copy large files on your com-

puter, playback may be interrupted. Try closing any

unused programs, use a more powerful computer, or

use a dedicated server.

—

If the server is serving large music files to several

networked devices simultaneously, the network may

become overloaded and playback may be inter-

rupted. Reduce the number of playback devices on

the network, upgrade your network, or use a switch

instead of a hub.

—

If you’re using DHCP, your router may not always

allocate the same IP address to the AV receiver, so if

you find that you can’t connect to a server or Internet

radio station, recheck the AV receiver’s IP address

on “Network” screen.

Check the “Network Settings”. 76

USB Mass Storage Device Playback

Make sure the USB device is plugged in properly. —

The AV receiver supports USB devices that support

the USB mass storage device class. However, play-

back may not be possible with some USB devices

even if they conform to the USB mass storage device

class.

—

USB memory devices with security functions cannot

be played.

—

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info