Bedienungsanleitung Onkyo TX-NR3010 (Seite 84 von 168) (Englisch)

492661

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Advanced Operations

En-84

■ HDMI Through

` Off

` BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2,

PC, AUX, TV/CD, PHONO:

Selects the input source for which the HDMI

Through function is enabled.

` Last:

The HDMI Through function is activated on the input

source selected at the time of setting the AV receiver

to standby mode.

When enabling the HDMI Through function, regardless of

whether the AV receiver is on or in standby, both audio

and video streams from an HDMI input will be output to

the TV or other components via HDMI connection. The

HDMI indicator will be dimly-lit in standby mode. Note

that the indicator may not light under certain conditions

(

➔ page 62).

This setting is fixed to “Auto” automatically when the

above “HDMI Control(RIHD)” setting is set to “On”,

resulting in automatic input source selection.

Note

• Only an input source assigned to an HDMI IN via “HDMI Input”

setting is enabled (➔ page 64).

• The power consumption in standby mode will increase during the

HDMI Through function; however in the following cases, the

power consumption can be saved:

– The TV is in standby mode.

– You are watching a TV program.

• Refer to the connected component’s instruction manual for

details.

• Depending on the connected component, the correct input source

may not be selected with the setting fixed to “Auto”.

• This setting is set to “Off” automatically when the “HDMI

Control(RIHD)” setting is set to “Off”.

■ Audio TV Out

` Off

` On

This preference determines whether the incoming audio

signal is output from the HDMI output. You may want to

turn this preference on if your TV is connected to the

HDMI output and you want to listen to the audio from a

connected component through your TV’s speakers.

Normally, this should be set to “Off”.

Note

• If “On” is selected and the audio can be output from the TV, the

AV receiver will output no sound through its speakers. In this

case, “TV Speaker” appears on the AV receiver’s display by

pressing DISPLAY.

• When “HDMI Control(RIHD)” is set to “On”, this setting is

fixed to “Auto”.

• When Digital Processing Crossover Network is being used, this

setting is not available.

• With some TVs and input signals, no sound may be output even

when this setting is set to “On”.

• When “Audio TV Out” or

“HDMI Control(RIHD)” is set to

“On” and you’re listening through your TV’s speakers

(➔ page 21), turning up the AV receiver’s volume control will

make the sound be output from the AV receiver’s front left and

right speakers. To stop the AV receiver’s speakers producing

sound, change the settings, change your TV’s settings, or turn

down the AV receiver’s volume.

• Listening mode cannot be changed when this setting is set to

“On” and the input source is not HDMI.

■ Audio Return Channel (ARC)

` Off

` Auto:

The audio signal from your TV tuner can be sent to

HDMI OUT MAIN of the AV receiver.

The audio return channel (ARC) function allows an ARC

capable TV to send the audio stream to HDMI OUT MAIN

of the AV receiver. To use this function, you must select

the TV/CD input selector and your TV must be ARC

capable. Default setting: “

----”

Note

• This setting is fixed to “----” when the “HDMI

Control(RIHD)” setting is set to “Off”.

• This setting is set to “Auto” automatically when the “HDMI

Control(RIHD)” setting is set to “On” for the first time.

• If you set “Audio Return Channel” to “Auto”, the “Audio

Selector” settings of the TV/CD input selector will be

automatically switched to “ARC” (➔ page 80).

■ Lip Sync

` Off

` On

This function allows the AV receiver to automatically

correct any delay between the video and the audio, based

on the data from the connected monitor.

Note

• This function works only if your HDMI-compatible TV supports

HDMI Lip Sync.

After changing the settings of the “HDMI

Control(RIHD)”, “HDMI Through” or “Audio

Return Channel”, turn off the power on all connected

pieces of equipment and then turn them on again. Refer

to the user’s manuals for all connected pieces of

equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info