Bedienungsanleitung Onkyo TX-NR3010 (Seite 83 von 168) (Englisch)

492661

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Advanced Operations

En-83

OSD Setup

■ On Screen Display

` On

` Off

This preference determines whether operation details are

displayed on-screen when an AV receiver function is

adjusted.

Even when “On” is selected, operation details may not be

output if the input source is connected to an HDMI IN.

■ Language

(North American models)

` English

, Deutsch, Français, Español, Italiano,

Nederlands, Svenska

(European models)

` English

, Deutsch, Français, Español, Italiano,

Nederlands, Svenska, 中文

This setting determines the language used for the on-screen

menus.

■ Screen Saver

` 3min

, 5min, 10min

` Off

With this setting, you can set the time until the screen saver

activates itself. Once active, the screen saver will go off

and the screen will return to its previous state if the AV

receiver is operated in any way.

Main Menu Hardware Setup

Tuner

■ AM/FM Frequency Step (North American

models)

` 10kHz/200kHz

` 9kHz/50kHz:

Select the frequency step according to your area.

■ AM Frequency Step (European models)

` 10kHz:

` 9kHz

Select the frequency step according to your area.

For AM/FM tuning to work properly, you must specify the

AM/FM frequency step used in your area.

Note

• When this setting is changed, all radio presets will be deleted.

HDMI

■ HDMI Control(RIHD)

` Off

` On

Turn this setting on to allow p-compatible

components connected via HDMI to be controlled by the

AV receiver (➔ page 115).

Note

• When the setting is set to “On” and the menu is closed, the names

of connected p-compatible components and “RIHD On”

are displayed on the AV receiver.

“Search…” → “(name)” → “RIHD On”

When the AV receiver cannot receive the name of the component,

it is displayed as “Player

” or “Recorder

”, etc. (“

” shows up

and indicates the number of components, when two or more are

received).

• When an p-compatible component is connected to the

AV receiver via an HDMI cable, the name of the connected

component is displayed on the AV receiver display. For example,

while you are watching TV broadcasting, if you operate a Blu-ray

Disc/DVD player (being powered on) with the remote control of

the AV receiver, the name of the Blu-ray Disc/DVD player will

be displayed on the AV receiver.

• Set it to

“Off” when a connected piece of equipment is not

compatible or it is unclear whether the equipment is compatible

or not.

• If operation is not normal when set to

“On”, change the setting to

“Off”.

• Refer to the connected component’s instruction manual for

details.

• When the “HDMI Control(RIHD)” setting is set to “On”, the

power consumption on standby mode slightly increases.

(Depending on the TV status, the AV receiver will enter standby

mode as usual.)

• The HDMI component (connected to HDMI IN 1/2/3/AUX

INPUT) selected for Zone 2 cannot be operated with the remote

controller through the AV receiver using RIHD function and also

cannot be operated on the TV connected to HDMI OUT MAIN

using CEC function.

• The HDMI component (connected to HDMI IN 1/2/3/AUX

INPUT) selected for Zone 2 can be operated on the TV in Zone 2

using CEC function.

• When the source equipment is connected with the u

connection, it may malfunction if “HDMI Control(RIHD)” is

set to “On”.

Hardware Setup

1 2 3 4 5

“Setup”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info