Bedienungsanleitung Onkyo TX-NR3010 (Seite 81 von 168) (Englisch)

492661

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Advanced Operations

En-81

Setting the Incoming Digital Signal (Fixed

Mode)

■ Fixed Mode

` Off

The format is detected automatically. If no digital

input signal is present, the corresponding analog

input is used instead.

` PCM:

Only 2-channel PCM format input signals will be

heard. If the input signal is not PCM, the PCM

indicator will flash and noise may also be produced.

` DTS:

Only DTS (but not DTS-HD) format input signals

will be heard. If the input signal is not DTS, the dts

indicator will flash and there will be no sound.

When “HDMI”, “COAXIAL” or “OPTICAL” is selected

in the “Audio Selector” setting, you can then specify the

signal type in “Fixed Mode”.

Normally, the AV receiver detects the signal format

automatically. However, if you experience either of the

following issues when playing PCM or DTS material, you

can manually set the signal format to PCM or DTS.

• If the beginnings of tracks from a PCM source are cut off,

try setting the format to PCM.

• If noise is produced when fast forwarding or reversing a

DTS CD, try setting the format to DTS.

Note

• The setting will be reset to “Off” when you change the setting in

“Audio Selector”.

Main Menu Listening Mode Preset

You can assign a default listening mode to each input

source that will be selected automatically when you select

each input source. For example, you can set the default

listening mode to be used with Dolby Digital input signals.

You can select other listening modes during playback, but

the mode specified here will be resumed once the AV

receiver has been set to standby.

■ Analog/PCM/Digital

With this setting, you can specify the listening mode

used when an analog (CD, TV, LD, VHS, MD, turntable,

radio, cassette, cable, satellite, etc.) or PCM digital (CD,

DVD, etc.) audio signal is played.

Note

•For the “GAME2” input selector, only “PCM” is available.

■ Mono/Multiplex Source

With this setting, you can specify the listening mode

used when a mono digital audio signal is played (DVD,

etc.).

■ 2ch Source

With this setting, you can specify the listening mode

used when 2-channel (2/0) stereo digital sources, such as

Dolby Digital or DTS, are played.

Listening Mode Preset

Use q/w to select the input source that you want to

set, and then press ENTER.

The following menu appears.

1 2 3 4 5

“Setup”

Default listening mode for analog and PCM sources.

Analog/PCM

Mono/Multiplex Source

2ch Source

Dolby D/Dolby D Plus/TrueHD

DTS/DTS-ES/DTS-HD

Other Multich Source

Last Valid e r

5-1. Listening Mode Preset

BD/DVD

Last Valid

Use q/w to select the signal format that you want to

set, and then use e/r to select a listening mode.

Only listening modes that can be used with each input

signal format can be selected (➔ pages 45 to 52).

The “Last Valid” option means that the listening

mode selected last will be used.

The “Straight Decode” option means that straight

decoding listening mode (Dolby Digital, DTS, etc.) is

selected.

Note

•For the “TUNER” input selector, only “Analog” will be

available.

•For the “NET” or “USB” input selector, only “Digital” will

be available.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info