Bedienungsanleitung Onkyo TX-NR3010 (Seite 102 von 168) (Englisch)

492661

102

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Appendix

En-102

■ Only the front speakers produce sound

■ Only the center speaker produces sound

■ The surround speakers produce no sound

■ The center speaker produces no sound

■ The front high, front wide and surround back

speakers produce no sound

■ The subwoofer produces no sound

■ There’s no sound with a certain signal format

■ Can’t select the Pure Audio listening mode

■ Can’t get 6.2/7.2 playback

■ The speaker volume cannot be set as required

■ Noise can be heard

■ The Late Night function doesn’t work

If the input signal format is set to “PCM” or “DTS”.

Set it to “Off”.

When the Stereo or Mono listening mode is selected,

only the front speakers and subwoofer produce

sound.

In the Mono listening mode, only the front speakers

output sound if the “Output Speaker” setting is set

to “Left / Right”.

Check the Speaker Configuration. 67

If you use the Dolby Pro Logic IIx Movie, Dolby Pro

Logic IIx Music, or Dolby Pro Logic IIx Game

listening mode with a mono source, such as an AM

radio station or mono TV program, the sound is

concentrated in the center speaker.

—

In the Mono listening mode, only the center speaker

output sound if the “Output Speaker” setting is set

to “Center”.

Make sure the speakers are configured correctly. 67

When the T-D (Theater-Dimensional), Stereo or

Mono listening mode is selected, the surround

speakers produce no sound.

—

Depending on the source and current listening mode,

not much sound may be produced by the surround

speakers. Try selecting another listening mode.

Make sure the speakers are configured correctly. 67

When the Stereo or Mono listening mode is selected,

the center speaker produces no sound.

—

In the Mono listening mode, only the front speakers

output sound if the “Output Speaker” setting is set

to “Left / Right”.

Make sure the speakers are configured correctly. 67

Depending on the current listening mode, no sound

may be produced by the front high, front wide and

surround back speakers. Select another listening

mode.

Depending on the sources, the sound produced by the

front high, front wide and surround back speakers

may be weak.

—

Make sure the speakers are configured correctly. 67

When Powered Zone 2 is used, playback in the main

room is reduced to 7.2 channels and the front wide

speakers produce no sound.

—

When Powered Zone 3 is used, playback in the main

room is reduced to 5.2 channels and the front high,

front wide and surround back speakers produce no

sound.

—

When you play source material that contains no

information in the LFE channel, the subwoofer

produces no sound.

—

Make sure the speakers are configured correctly. 67

Check the digital audio output setting on the

connected device. On some game consoles, such as

those that support DVD, the default setting is off.

—

With some DVD-Video discs, you need to select an

audio output format from a menu.

—

Depending on the input signal, some listening modes

cannot be selected.

45-52

The Pure Audio listening mode cannot be selected

while Zone 2/3 is on.

—

If no surround back speakers, front wide and front

high speakers are connected, or the Zone 3 speakers

are being used, 6.2/7.2 playback is not possible.

—

Depending on the number of connected speakers, it is

not always possible to select all of the listening

modes.

45-52

Check to see if a maximum volume has been set. 82

If the volume level of each individual speaker has

been adjusted to high positive values, then the

maximum master volume possible may be reduced.

Note that the individual speaker volume levels are set

automatically after the Audyssey MultEQ

XT32

Room Correction and Speaker Setup has been

performed.

42, 69

Using cable ties to bundle audio cables with power

cords, speaker cables, and the like may degrade the

audio performance, so refrain from doing it.

—

An audio cable may be picking up interference. Try

repositioning your cables.

—

Make sure the source material is Dolby Digital,

Dolby Digital Plus, and Dolby TrueHD.

Make sure that the “TrueHD Loudness

Management” setting is not set to “Off”. The Late

Night function doesn’t work when this setting is

disabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info