Bedienungsanleitung Onkyo TX-NR3010 (Seite 103 von 168) (Englisch)

492661

103

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Appendix

En-103

■ About DTS signals

■ The beginning of audio received by an HDMI IN

can’t be heard

■ There’s no sound during Whole House Mode

■ There’s no picture

■ There’s no picture from a source connected to

an HDMI IN

■ The on-screen menus don’t appear

■ The on-screen information does not appear

■ Reception is noisy, FM stereo reception is noisy,

or the FM STEREO indicator doesn’t light

When DTS program material ends and the DTS

bitstream stops, the AV receiver remains in DTS

listening mode and the dts indicator remains on. This

is to prevent noise when you use the pause, fast

forward, or fast reverse function on your player. If

you switch your player from DTS to PCM, you may

not hear any sound because the AV receiver does not

switch formats immediately. In such case, you should

stop your player for about three seconds and then

resume playback.

—

With some CD and LD players, you won’t be able to

playback DTS material properly even though your

player is connected to a digital input on the AV

receiver. This is usually because the DTS bitstream

has been processed (e.g., output level, sampling rate,

or frequency response changed) and the AV receiver

doesn’t recognize it as a genuine DTS signal. In such

cases, you may hear noise.

—

Playing DTS program material, using the pause, fast

forward, or fast reverse function on your player may

produce a short audible noise. This is not a

malfunction.

—

Since it takes longer to identify the format of an

HDMI signal than it does for other digital audio

signals, audio output may not start immediately.

—

Make sure you’ve selected an analog audio input. —

Video

Make sure that all video connecting plugs are pushed

in all the way.

Make sure that each video component is properly

connected.

21, 22

If your TV is connected to the HDMI output, set the

“Monitor Out” setting other than “Analog”, and

select “-----” in the “HDMI Input” setting to

watch composite video, and component video

sources.

If your TV is connected to the COMPONENT

VIDEO MONITOR OUT or MONITOR OUT V, set

the “Monitor Out” setting to “Analog”, and select

“-----” in the “Component Video Input” to watch

composite video sources.

63, 65

If the video source is connected to a component video

input, you must assign that input to an input selector,

and your TV must be connected to either the HDMI

output or COMPONENT VIDEO MONITOR OUT.

22, 65

If the video source is connected to a composite video

input, your TV must be connected to the HDMI

output or the corresponding composite video output.

If the video source is connected to an HDMI input,

you must assign that input to an input selector, and

your TV must be connected to the HDMI output.

21, 64

While the Pure Audio listening mode is selected, the

analog video circuitry is turned off and only video

signals input through HDMI IN can be output.

On your TV, make sure that the video input to which

the AV receiver is connected is selected.

—

Reliable operation with an HDMI-to-DVI adapter is

not guaranteed. In addition, video signals from a PC

are not guaranteed.

117

When the “Monitor Out” setting is set to “Analog”,

no video is output by the HDMI output.

63,

112

When the resolution is set to any resolution not

supported by the TV, no video is output from the

HDMI output.

If the message “Resolution Error” appears on the

AV receiver’s display, this indicates that your TV

does not support the current video resolution and you

need to select another resolution on your DVD

player.

—

On your TV, make sure that the video input to which

the AV receiver is connected is selected.

—

When the AV receiver is not connected to a TV via

HDMI OUT MAIN, on-screen menus are not

displayed.

—

Depending on the input signal, the on-screen

information may not appear when the input signal

from HDMI IN is output to a device connected to the

HDMI output.

Tuner

Relocate your antenna. —

Move the AV receiver away from your TV or

computer.

—

Listen to the station in mono. 37

When listening to an AM station, operating the

remote controller may cause noise.

—

Passing cars and airplanes can cause interference. —

Concrete walls weaken radio signals. —

If nothing improves the reception, install an outdoor

antenna.

—

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info