Bedienungsanleitung Onkyo TX-NR3010 (Seite 105 von 168) (Englisch)

492661

105

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Appendix

En-105

■ There’s no sound

■ The Zone 2/3 speakers produce no sound

■ Can’t access the server or Internet radio

■ Playback stops while listening to music files on

the server

■ Can’t connect to the AV receiver from a Web

browser

■ Can’t access the music files on a USB device

■ Standby power consumption

■ The sound changes when I connect my

headphones

■ The speaker distance cannot be set as required

■ The display doesn’t work

■ How do I change the language of a multiplex

source

■ The u functions don’t work

■ The functions System Off/Auto Power On and

Direct Change don’t work for components

connected via u

Zone 2/3

Only components connected to analog or HDMI (2ch

PCM) inputs can be played in Zone 2.

—

Only components connected to analog inputs can be

played in Zone 3.

—

See “Multi Zone” for the conditions in which

Powered Zone 2/3 cannot be used.

To use the Zone 2 speakers, you must set the

“Powered Zone 2” setting to “Yes”.

To use the Zone 3 speakers, you must set the

“Powered Zone 3” setting to “Yes”.

Music Server and Internet Radio

Check the network connection between the AV

receiver and your router or switch.

118

Make sure that your modem and router are properly

connected, and make sure they are both turned on.

—

Make sure the server is up and running and

compatible with the AV receiver.

119

Check the “Network”settings. 85

Make sure your server is compatible with the AV

receiver.

119

If you download or copy large files on your

computer, playback may be interrupted. Try closing

any unused programs, use a more powerful computer,

or use a dedicated server.

—

If the server is serving large music files to several

networked devices simultaneously, the network may

become overloaded and playback may be interrupted.

Reduce the number of playback devices on the

network, upgrade your network, or use a switch

instead of a hub.

—

If you’re using DHCP, your router may not always

allocate the same IP address to the AV receiver, so if

you find that you can’t connect to a server or Internet

radio station, recheck the AV receiver’s IP address on

the “Network” screen.

Check the “Network” settings. 85

USB Device Playback

Make sure the USB device is plugged in properly. —

The AV receiver supports USB devices that support

the USB mass storage device class. However,

playback may not be possible with some USB devices

even if they conform to the USB mass storage device

class.

119

USB memory devices with security functions cannot

be played.

—

Others

In the following cases, the power consumption in

standby mode may reach up to a maximum of

12.5 W:

–The “HDMI Control(RIHD)” setting is set to

“On”. (Depending on the TV status, the AV

receiver will enter standby mode as usual.)

–The “HDMI Through” setting is set to other than

“Off”.

–The “Network Standby” setting is set to “On”.

83, 84,

If an MHL-enabled mobile device is connected to the

AUX (front) input, the power consumption in standby

mode will increase.

When a pair of headphones is connected, the listening

mode is set to Stereo, unless it’s already set to Stereo,

Mono, Direct, or Pure Audio.

—

The values entered may be automatically adjusted

with values best-suited for your home theater.

—

The display is turned off when the Pure Audio

listening mode is selected.

—

Use the “Multiplex” setting in the “Audio Adjust”

menu to select “Main” or “Sub”.

To use u, you must make an u connection and an

analog audio connection (RCA) between the

component and AV receiver, even if they are

connected digitally.

While Zone 2/3 is selected, the u functions don’t

work.

These functions don’t work when Zone 2/3 is turned

on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info