Bedienungsanleitung Onkyo TX-NR414 (Seite 69 von 128) (Englisch)

492644

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Appendix

En-69

Using an RIHD-

compatible TV, Player,

or Recorder

p, which stands for Remote Interactive over

HDMI, is the name of the system control function found on

Onkyo components. The AV receiver can be used with

CEC (Consumer Electronics Control), which allows

system control over HDMI and is part of the HDMI

standard. CEC provides interoperability between various

components, however, operation with components other

than p-compatible components cannot be

guaranteed.

The following components are p-compatible (As

of January 2012).

■ TV

• Toshiba TV

•Sharp TV

■ Players/Recorders

• Onkyo and Integra p-compatible players

• Toshiba players and recorders

• Sharp players and recorders (only when used together

with Sharp TV)

Models other than those mentioned above may have some

interoperability if compatible with CEC, which is part of the

HDMI Standard, but operation cannot be guaranteed.

Note

• For proper linked operations, do not connect more p-

compatible components than the quantities specified below, to

the HDMI input terminal.

– Blu-ray Disc/DVD players: up to three.

– Blu-ray Disc/DVD recorders/Digital Video Recorders: up to

three.

– Cable/Satellite Set-top boxes: up to four.

• Do not connect the AV receiver to another AV receiver/AV

amplifier via HDMI.

• Proper linked operations are not guaranteed when more

p-compatible components than the above-mentioned

quantities are connected.

■ For p-compatible TV

The following linked operations are enabled by connecting

the AV receiver to an p-compatible TV.

• The AV receiver will enter standby mode when the power

of the TV is turned to standby.

• You can set on the menu screen of the TV to either output

the audio from the speakers connected to the AV

receiver, or from the speakers of the TV.

• It is possible to output the video/audio coming from the

antenna or from the input jack of the TV from the

speakers connected to the AV receiver. (A connection

such as optical digital cable or similar is required in

addition to the HDMI cable.)

• Input to the AV receiver can be selected with the remote

controller of the TV.

• Operations such as volume adjustment or similar for the

AV receiver can be performed from the remote controller

of the TV.

■ For p-compatible players/recorders

The following linked operations are enabled by connecting

the AV receiver to an p-compatible

player/recorder.

• When playback is started on the player/recorder, AV

receiver will switch to the HDMI input of the

player/recorder that is playing back.

• Operation of the player/recorder is possible using the

remote controller supplied with the AV receiver.

Depending on the model used, not all operations may be

available.

About p-compatible components

Operations that can be performed with

p connection

To be continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR414 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR414

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info