Bedienungsanleitung Onkyo TX-NR414 (Seite 71 von 128) (Englisch)

492644

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Appendix

En-71

About HDMI

Designed to meet the increased demands of digital TV,

HDMI (High Definition Multimedia Interface) is a new

digital interface standard for connecting TVs, projectors,

Blu-ray Disc players/DVD players, set-top boxes, and

other video components. Until now, several separate video

and audio cables have been required to connect AV

components. With HDMI, a single cable can carry control

signals, digital video, and up to eight channels of digital

audio (2-channel PCM, multichannel digital audio, and

multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible

with DVI (Digital Visual Interface)

, so TVs and displays

with a DVI input can be connected by using an HDMI-to-

DVI adapter cable. (This may not work with some TVs and

displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital

Content Protection)

, so only HDCP-compatible

components can display the picture.

• 2-channel linear PCM (32–192 kHz, 16/20/24 bit)

• Multichannel linear PCM (up to 7.1 ch, 32–192 kHz,

16/20/24 bit)

• Bitstream (DSD, Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, DTS, DTS-HD High Resolution Audio,

DTS-HD Master Audio)

Your Blu-ray Disc player/DVD player must also support

HDMI output of the above audio formats.

The AV receiver supports HDCP (High-bandwidth Digital

Content Protection)

, a copy-protection system for digital

video signals. Other devices connected to the AV receiver

via HDMI must also support HDCP.

DVI (Digital Visual Interface): The digital display interface

standard set by the DDWG

in 1999.

HDCP (High-bandwidth Digital Content Protection): The

video encryption technology developed by Intel for

HDMI/DVI. It’s designed to protect video content and requires

a HDCP-compatible device to display the encrypted video.

DDWG (Digital Display Working Group): Lead by Intel,

Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon

Image, this open industry group’s objective is to address the

industry’s requirements for a digital connectivity specification

for high-performance PCs and digital displays.

Note

• The HDMI video stream is compatible with DVI (Digital Visual

Interface), so TVs and displays with a DVI input can be

connected by using an HDMI-to-DVI adapter cable. (Note that

DVI connections only carry video, so you’ll need to make a

separate connection for audio.) However, reliable operation with

such an adapter is not guaranteed. In addition, video signals from

a PC are not supported.

• The HDMI audio signal (sampling rate, bit length, etc.) may be

restricted by the connected source component. If the picture is

poor or there’s no sound from a component connected via HDMI,

check its setup. Refer to the connected component’s instruction

manual for details.

The AV receiver’s HDMI interface is based on the

following:

Audio Return Channel, 3D, x.v.Color, DeepColor, Lip

Sync, DTS-HD Master Audio, DTS-HD High

Resolution Audio, Dolby TrueHD, Dolby Digital Plus,

DSD and Multichannel PCM.

Supported Audio Formats About Copyright Protection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR414 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR414

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info