Bedienungsanleitung Onkyo TX-NR5007 (Seite 152 von 164) (Englisch)

553765

152

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

152

Controlling Other Components—Continued

The AV receiver’s remote controller can learn the com-

mands of other remote controllers. By transmitting, for

example, the Play command from your CD player’s

remote controller, the remote controller can learn it, and

then transmit the exact same command when its Play

[1] button is pressed in the CD remote mode.

This is useful when you’ve entered the appropriate

remote control code (page 141) but some buttons don’t

work as expected.

Notes:

• The following buttons cannot learn new commands:

REMOTE MODE, ACTIVITIES [ALL OFF],

[MY MOVIE], [MY TV], [MY MUSIC].

• The remote controller can learn approximately 70 to

90 commands, although this will be less if commands

that use a lot of memory are learned.

• Remote controller buttons such as Play, Stop, Pause,

and so on are preprogrammed with commands for

controlling Onkyo CD players, cassette decks, and

DVD players. However, they can learn new com-

mands, and you can restore the preprogrammed com-

mands at any time by resetting the remote controller

(see page 142).

• To overwrite a previously learned command, repeat

this procedure.

• Depending on the remote controller that you are using,

there may be some buttons that won’t work as

expected, or even some remotes that cannot be learned

at all.

• Only commands from infrared remote controllers can

be learned.

• When the remote controller’s batteries expire, all

learned commands will be lost and will have to be

learned all over again, so don’t discard your other

remote controllers.

■ Deleting Learning Commands

1. While holding down the REMOTE MODE button

for the mode in which you want to delete the com-

mand, press and hold down the TV [9] button

until the REMOTE MODE button lights up (about 3

seconds).

2. Press the REMOTE MODE button or the button

from which you want to delete the commands.

The REMOTE MODE button flashes twice.

When you press the REMOTE MODE button, all

commands learned in that remote mode will be

deleted.

Learning Commands

(3 seconds)

While holding down the REMOTE

MODE button for the mode in

which you want to use the com-

mand, press and hold down the

[ON] button until the REMOTE

MODE button lights up (about 3

seconds).

On the supplied remote control-

ler, press the button you want to

learn the new command.

Point the remote controllers at

each other, about 2 to 6 inches (5

to 15 cm) apart, and then press

and hold the button whose com-

mand you want to learn until the

REMOTE MODE button flashes.

REMOTE

MODE

If the command is learned successfully,

the REMOTE MODE button flashes

twice.

To learn more commands, repeat

steps 2 and 3.

Press any REMOTE MODE button

when you’ve finished. The REMOTE

MODE button flashes twice.

SLEEP

DIM

MER

SUR

MODE

VIDEO-1

VIDEO-2

TAPE

DVD

C D

TUN

PHONO

INPUT SE

LEC

DISC

VOLUM

CH SEL

ESET

ING

EST

TON

MULTI-CH

INPUT

GROUP

About 2 to 6

inches (5 to 15 cm)

Supplied remote

controller

(

RC-747M

)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR5007 Seite 152

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR5007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info