Bedienungsanleitung Onkyo TX-NR5007 (Seite 155 von 164) (Englisch)

553765

155

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

155

Troubleshooting—Continued

The surround speakers produce no sound

• When the DTS Surround Sensation, T-D (Theater-

Dimensional), Stereo or Mono listening mode is

selected, the surround speakers produce no sound.

• Depending on the source and current listening mode,

not much sound may be produced by the surround

speakers. Try selecting another listening mode.

• Make sure the speakers are configured correctly

(page 95).

The center speaker produces no sound

• When the DTS Surround Sensation or Stereo listening

mode is selected, the center speaker produces no

sound.

• In the Mono listening mode, only the front speakers

output sound if the “Output Speaker” setting is set to

“Left / Right” (page 100).

• Make sure the speakers are configured correctly

(page 95).

The front high, front wide and surround back

speakers produce no sound

• Depending on the current listening mode, no sound

may be produced by the front high, front wide, and

surround back speakers. Select another listening mode

(page 89).

• Not much sound may be produced by the front high,

front wide, and surround back speakers with some

sources.

• Make sure the speakers are configured correctly

(page 95).

• While Powered Zone 2 is being used, playback in the

main room is reduced to 7.2-channels and the front

high and front wide speakers produce no sound

(page 130).

• While Powered Zone 3 is being used, playback in the

main room is reduced to 7.2-channels and the sur-

round back speakers produce no sound (page 130).

The subwoofer produces no sound

• When you play source material that contains no infor-

mation in the LFE channel, the subwoofer may pro-

duce no sound.

• Make sure the speakers are configured correctly

(page 95).

The Zone 2/3 speakers produce no sound

• The Zone 2/3 speakers only output sources that are

connected to an analog input. Check to see if the

source component is connected to an analog input.

• Powered Zone 2 cannot be used if “Speakers

Type(FrontB)” is set to “Normal”, “Bi-Amp”, or

“BTL” (pages 57 and 131).

• Powered Zone3 cannot be used if “Speakers

Type(FrontA)” or “Speakers Type(FrontB)” is set to

“Bi-Amp” or “BTL” (pages 57 and 133).

There’s no sound with a certain signal format

• Check the digital audio output setting on the con-

nected device. On some game consoles, such as those

that support DVD, the default setting is off.

• With some DVD-Video discs, you need to select an

audio output format from a menu.

• Depending on the input signal, some listening modes

cannot be selected (pages 82 to 88).

Can’t get 6.2/7.2 playback

• If no front high, front wide and surround back speak-

ers are connected, or the Zone 2/3 speakers are being

used, 6.2/7.2 playback is not possible.

• You can not always select all of the listening modes,

depending on the number of the speakers connected

(pages 82 to 88).

The speaker volume cannot be set as required

(The volume cannot be set to +18.0 dB)

• Check to see if a maximum volume has been set

(page 110).

• If the volume level of each individual speaker has been

adjusted to high positive values (page 97), then the

maximum master volume possible may be reduced.

Note that the individual speaker volume levels are set

automatically after Audyssey MultEQ

XT Room

Correction and Speaker Setup has been completed

(page 62).

Noise can be heard

• Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

• An audio cable may be picking up interference. Try

repositioning your cables.

The Late Night function doesn’t work

• Make sure the source material is Dolby Digital, Dolby

Digital Plus, and Dolby TrueHD (page 117).

The analog multichannel input doesn’t work

• Check the multichannel input connections (page 37).

• Make sure that the multichannel input is assigned to

the input selector (page 57).

• Make sure that the multichannel input is selected

(page 80).

• Check the audio output settings on your source com-

ponent.

About DTS signals

• When DTS program material ends and the DTS bit-

stream stops, the AV receiver remains in DTS listen-

ing mode and the DTS indicator remains on. This is to

prevent noise when you use the pause, fast forward, or

fast reverse function on your player. If you switch your

player from DTS to PCM, because the AV receiver

does not switch formats immediately, you may not

hear any sound, in which case you should stop your

player for about three seconds, and then resume play-

back.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR5007 Seite 155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR5007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info