Bedienungsanleitung Onkyo TX-NR535 (Seite 7 von 20) (Englisch)

548134

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Step 2:

Setting Up

Turning the power on

Connect the power cord to the outlet (



). Press

ON/

STANDBY on the main unit or

RECEIVER on the remote

controller to turn the unit on or to standby mode.

• When the unit is turned on, a large instantaneous current

may flow affecting functionality of the computer and other

devices. It is recommended to use a separate outlet from

that for the computer or such other sensitive devices.



Taiwanese model includes a removable power cord. Connect the power

cord to AC INLET of the unit and then connect to the outlet. Always

disconnect the outlet side first when disconnecting the power cord.

Firmware update notification: If the unit is connected via

LAN and there is firmware update available, the "Update

New F/W" message will appear. Press the





buttons on

the remote controller to select whether to update or not

and press ENTER to confirm your selection. For details on

firmware update, see the Advanced Manual (http://www.

onkyo.com/manual/txnr535/adv/en.html).

Making automatic speaker setting

The AccuEQ Room Calibration function, our proprietary

technology, collects the test tones coming from each

speaker with the supplied speaker setup microphone and

performs automatic setting of the number of speakers,

volume level, each speaker's optimum crossover

frequencies, and distance from the primary listening

position. Distortion caused by difference of room acoustic

environment will also be corrected to produce clear, well-

balanced sound.

Place the speaker setup microphone at the

measurement position



• Correct measurement will not be possible if the

microphone is held by hand. It is desirable that the

microphone be placed on a stand at the height

of listener's ears. Measurement is not possible if

headphones are being used.

: Listening area : Measurement position

with microphone

Connect the speaker setup microphone to the

SETUP MIC jack on the unit.

SETUP MIC jack

Speaker setup

microphone

Follow the guidance displayed on the TV screen.

You can set up by viewing the guidance displayed on the

TV screen. To display the guidance, you need to make

HDMI connection between the unit and TV. Select the

item with the cursor buttons of the remote controller and

press ENTER to confirm your selection.

AccuEQ Room Calibration

Subwoofer < Yes >

[ENTER] : Next

The test tones sound from the connected speaker

and automatic speaker setting starts.

The microphone measures the test tones. Measurement

will be made twice for each speaker. It takes several

minutes to be completed.

• Each speaker generates test tones at high volume

level during measurement. Keep the room as quite

as possible during measurement. Measurement

may be interrupted if there is ambient noise or radio

frequency interference. Close the window and turn off

the home appliance and fluorescent light.

• To cancel measurement on the way, disconnect the

microphone plug.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR535 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR535

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info