Bedienungsanleitung Onkyo TX-NR579 (Seite 69 von 84) (Englisch)

462088

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

■ Can’t access the music files on a USB device

■ Standby power consumption

■ The sound changes when I connect my

headphones

■ The speaker distance cannot be set as required

■ The display doesn’t work

■ How do I change the language of a multiplex

source

■ The u functions don’t work

■ The functions System On/Auto Power On and

Direct Change don’t work for components

connected via u

■ When performing “Automatic Speaker Setup”,

the measurement fails showing the message

“Ambient noise is too high.”

■ The following settings can be made for the

composite video inputs

You must use the buttons on the unit to make these

settings.

On the AV receiver, press the input selector for the

input source that you want to set and the

SETUP button

simultaneously. While holding down the input selector

button, press

SETUP until “Video ATT:ON” appears

on the display. Then, release both buttons. To reactivate

the setting, repeat the above process so that “Video

ATT:OFF” appears on the display, and release the

buttons.

•Video Attenuation

This setting can be made for the BD/DVD, VCR/DVR,

CBL/SAT, GAME or AUX input.

If you have a game console connected to the composite

video input, and the picture isn’t very clear, you can

attenuate the gain.

Video ATT:OFF: (default).

Video ATT:ON: Gain is reduced by 2 dB.

■ If the picture on your TV/monitor connected to

HDMI OUT is unstable, try switching the

DeepColor function off

To turn off the DeepColor function, simultaneously

press the CBL/SAT and 8ON/STANDBY buttons on

the AV receiver. While holding down CBL/SAT, press

8ON/STANDBY until “Off” appears on the display.

Then, release both buttons. To reactivate the DeepColor

function, repeat the above process until “On” appears

on the display and release the buttons.

USB Device Playback

Make sure the USB device is plugged in properly. —

The AV receiver supports USB devices that support

the USB mass storage device class. However,

playback may not be possible with some USB

devices even if they conform to the USB mass

storage device class.

—

USB memory devices with security functions cannot

be played.

—

Others

In the following cases, the power consumption in

standby mode may reach up to a maximum of 37 W:

– You are using the Universal Port jack.

–“Network Control” is set to “Enable” in the

“Network” setting.

–“HDMI Control (RIHD)” setting is set to “On”.

(Depending on the TV status, the AV receiver

will enter standby mode as usual.)

–The “HDMI Through” setting is set to other than

“Off”.

16, 52,

53, 54

When a pair of headphones is connected, the

listening mode is set to Stereo, unless it’s already set

to Stereo, Mono, Direct or Pure Audio.

—

In some cases, corrected values suitable for home

theater use may be set automatically.

—

The display is turned off when the Pure Audio

listening mode is selected.

—

Use the “Multiplex” setting on the “Audio Adjust”

menu to select “Main” or “Sub”.

To use u, you must make an u connection and

an analog audio connection (RCA) between the

component and AV receiver, even if they are

connected digitally.

These functions don’t work when Zone 2 is turned

on.

This can be caused by a malfunction in your speaker

unit. Check if the unit produces normal sounds.

—

The AV receiver contains a microcomputer for signal

processing and control functions. In very rare situations,

severe interference, noise from an external source, or

static electricity may cause it to lockup. In the unlikely

event that this happens, unplug the power cord from the

wall outlet, wait at least five seconds, and then plug it

back in.

Onkyo is not responsible for damages (such as CD

rental fees) due to unsuccessful recordings caused by

the unit’s malfunction. Before you record important

data, make sure that the material will be recorded

correctly.

Before disconnecting the power cord from the wall

outlet, set the AV receiver to standby.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR579 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR579

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info