Bedienungsanleitung Onkyo TX-NR801 (Seite 53 von 97) (Englisch)

553769

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Input Setup (Basic)—Continued

This sub-menu allows you to adjust for the volume dif-

ferences between your various input source components.

When switching input sources, you may ﬁnd that the

output level for different components or input sources

connected to the TX-NR801/TX-NR801E is different

even though the main volume setting is the same. Under

normal circumstances, you would then have to change

the volume setting each time you change the input

source. This Intelli Volume setting allows you to preset a

volume level for each input source separately so that

when you do switch from one input source to another,

the TX-NR801/TX-NR801E adjusts the volume accord-

ingly and the volume stays the same.

Use the / / / buttons to

move the cursor to the desired

character and then press the

ENTER button.

The characters entered will appear in

order in the 10-character space ﬁeld

above.

Note:

If you are using the front display and not

the OSD Menu, press the button when

“Char: ” appears in the front display.

Then “ABCDEF..” appears. This is the

Character Input screen. The cursor but-

tons will allow you to navigate through

this screen just as they would if you were

using the OSD Menu so you will need to

refer to the ﬁgure below for the actual

layout of the Character Input screen.

At the Character Input screen, press the

cursor buttons to move the cursor to the

desired character and then press the

ENTER button. The characters entered

will appear in order in the 10-character

space ﬁeld above. After two seconds, the

Character Input screen appears again.

To change an existing character,

move the cursor backward with the

RETURN button or forward with the

ENTER button to the location of the mis-

taken character and then enter the desired

character as explained above.

To erase a character,

enter a blank space in its place.

2-4.Character Input

a.Character Display

:No

b.Character

Press to edit.

to clear.

Quit:[SETUP]

Input:DVD

2-4.Character Input

b.Character

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

abcdefghijklm

nopqrstuvwxyz

[ENTER] 0123456789-.’

()+*/=,:;!?_

Back:

[RETURN]

Input:DVD

After you have completed the

name, press the ENTER button

until you return to the Character

Input Sub-menu.

Once 10 characters are entered, you will

automatically return to the previous

screen. If the name is completed before

you enter 10 characters, enter spaces

until 10 characters are entered.

Adjusting the Volume Differences

Between Components (IntelliVolume)

1-3

Use the same procedures as the

ones for the “Character Input”

sub-menu to display the “Input

Setup” sub-menu.

Use the and cursor buttons to

select “IntelliVolume” and then

press the ENTER button.

The “IntelliVolume” menu appears.

Use the and cursor buttons

to set the desired value.

If the volume is quieter than other

sources, increase its decibel level with

the cursor button, or if it is louder

than other sources, decrease its decibel

level with the cursor button.

The Intelli Volume can be adjusted

between –12 and +12 decibels.

Press the SETUP button to return

to the main menu.

2-5.IntelliVolume Setup

a.IntelliVolume

: 0dB

Quit:[SETUP]

Input:DVD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR801 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info