553769
54
Zoom out
Zoom in
Vorherige Seite
1/97
Nächste Seite
54
Audio Adjust (Basic)
The “Audio Adjust” menu allows you to specify detailed
settings for the audio signal. This section explains the
basic settings for audio effects.
If you want to perform these operations using the remote
controller, first press the RCVR button.
This sub-menu allows you to adjust the bass and treble
sounds.
a. Bass
The Bass can be adjusted between –12 and +12 in 2-step
increments.
The Bass adjustment is only enabled for the front left,
center, front right, and subwoofer speakers.
b. Treble
The Treble can be adjusted between –12 and +12 in 2-
step increments.
The Treble adjustment is only enabled for the front left,
center and front right speakers.
This sub-menu allows you to decide which speakers to
output to when you are playing back a 5.1 channel
source with surround back speakers connected.
a. Surround Speakers for 5.1 playback
Surround L/R: Select to output the sound to the sur-
round left and right speakers as normal and output noth-
ing to the surround back speaker.
Surround Back: Select to output the sound to the sur-
round back speakers and output nothing to the surround
left and right speakers.
Surr L/R+Back: Select to output the sound to both the
surround left and right speakers and the surround back
speaker.
1
Display the main menu.
Press the SETUP button on the front panel or
SETUP button on the remote controller to display
the main menu on the monitor and front display.
2
Use the and cursor buttons to select
3. Audio Adjust and then press the
ENTER button.
The “Audio Adjust” menu appears.
3
Use the and cursor buttons to select
an item and then press the ENTER button.
4
Use the and cursor buttons to select
an item and then use the and cursor
buttons to set the desired value.
5
Press the SETUP button to exit.
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIO STEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNING
PRESET
SETUP/
ENTER/
RETURN/
Cursor
/ //
3.Audio Adjust
1.Tone Control
2.Surround Speakers
3.Sound Effect
default
[ENTER]Quit:[SETUP]
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
[ENTER]Quit:[SETUP]
Advanced Menu
Basic Menu
Adjusting the Bass and Treble Sound
(Tone Control)
Selecting Surround Speakers to Output
the Sound (Surround Speakers)
3-1.Tone Control
a.Bass : 0
b.Treble : 0
Quit:[SETUP]
3-2.Surround Speakers
a.Surround Speakers
for 5.1 Playback
:Surround L/R
Quit:[SETUP]
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo TX-NR801 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info