Bedienungsanleitung Onkyo TX-NR807 (Seite 105 von 148) (Englisch)

553771

105

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

105

Advanced Setup—Continued

Re-EQ Function

With the Re-EQ function, you can compensate a soundtrack whose high-frequency content is too harsh, making it

more suitable for home theater viewing.

Note (HT-RC180):

Re-EQ function can also be set using the [Re-EQ] button on the AV receiver.

Re-EQ Off: Re-EQ Function off (default).

On: Re-EQ Function on.

This function can be used with the following listening modes: Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, Multichannel, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS Express,

DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby PLIIx Movie, Neo:6 Cinema, and 5.1-channel source +

Neo:6.

Re-EQ(THX) Off: Re-EQ (THX) Function off.

On: Re-EQ (THX) Function on (default).

This function can be used with the following listening modes: THX Cinema, THX Surround EX, and

THX Select2 Cinema.

Note:

Settings for the Re-EQ function are kept in each listening mode. However, in THX listening mode, when the

AV receiver is turned off, it will return to “On”.

Audyssey Dynamic Volume™

Dynamic Volume

See “Dynamic Volume” of “Audio Adjust” on page 91.

Note:

If you would like to use Audyssey Dynamic Volume™ , when using THX listening modes, set “Loudness Plus”

setting to “Off” and set “Preserve THX Settings ” setting to “No”.

Music Optimizer

The Music Optimizer function enhances the sound quality of compressed music files. Use it with music files that use

“lossy” compression, such as MP3. The setting is stored individually for each input selector.

Note:

Music Optimizer function can also be set using the [MUSIC OPTIMIZER] button on the AV receiver.

Music Optimizer Off: Music Optimizer off (default).

On: Music Optimizer on.

Note:

The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below

48 kHz and analog audio input signals. The Music Optimizer is disabled when the Direct or Pure Audio listen-

ing mode is selected.

Speaker Levels

You can adjust the volume of each speaker while listening to an input source.

These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made here,

go to “Level Calibration” on page 87 before setting the AV receiver to Standby.

Subwoofer –15.0 dB to +12.0 dB (default: 0.0 dB)

Center –12.0 dB to +12.0 dB (default: 0.0 dB)

Notes:

• You cannot use this function while the AV receiver is muted.

• Speakers that are set to “No” or “None” in the “Speaker Configuration” cannot be adjusted (see page 85).

• This function will not work when the Pure Audio or Direct listening mode is selected to play analog audio.

TX-NR807_En.book Page 105 Tuesday, July 28, 2009 12:00 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR807 Seite 105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR807

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info