Bedienungsanleitung Onkyo TX-NR808 (Seite 53 von 100) (Englisch)

645307

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Picture Adjust

Using “Picture Adjust”, you can adjust the picture qual-

ity and reduce any noise appearing on the screen.

To view the TV picture while setting, press ENTER. To

return to the previous screen, press RETURN.

Note

• If you are using the analog RGB input, the following settings

have no effect: “Film Mode”, “Edge Enhancement”, and

“Noise Reduction”.

•“Picture Adjust” is not operable when the input selector is set

to “NET/USB”.

■ Game Mode

` Off

Game Mode off.

` On:

Game Mode on.

If video signal delay occurs during playback on a video

component (i.e. game console), select the corresponding

input source and set the “Game Mode” setting to “On”.

The delay will decrease but in return the picture quality

will become poor.

■ Wide Mode

*1*2

This setting determines the aspect ratio.

Note

•When the “Game Mode” is set to “On”, this setting is fixed at

“Full”.

` 4:3:

` Full:

` Zoom:

` Wide Zoom:

` Auto

According to the input signals and monitor output

setting, the AV receiver automatically selects the

“4:3”, “Full”, “Zoom” or “Wide Zoom” mode. For

the monitor output setting (➔ 42).

■ Picture Mode

*1*2

` Through:

The following settings are set to the default values:

“Film Mode”, “Edge Enhancement”, “Noise

Reduction”, “Brightness”, “Contrast”, “Hue” and

“Saturation”

` Custom:

You can set the following settings as you like: “Film

Mode”, “Edge Enhancement”, “Noise Reduction”,

“Brightness”, “Contrast”, “Hue” and “Saturation”

` Cinema:

Selected when the picture source is movie film, etc.

` Game:

Select to use in connecting a game console.

With “Picture Mode”, you can change the following set-

tings to be suitable for the movie or game screen by one

operation; “Film Mode”, “Edge Enhancement”, “Noise

Reduction”, “Brightness”, “Contrast”, “Hue” or “Satu-

ration”.

Note

• When the “Picture Mode” setting is set to other than “Custom”,

the following settings cannot be selected: “Film Mode”, “Edge

Enhancement”, “Noise Reduction”, “Brightness”, “Con-

trast”, “Hue” and “Saturation”.

■ Film Mode

` Video:

Does not process in either “3:2” or “2:2”.

` Auto:

Adjusts to the picture source, automatically selecting

“Film Mode”.

` 3:2:

Selected when the picture source is movie film, etc.

` 2:2:

Selected when the picture source is computer graph-

ics, animation, etc.

The AV receiver will adjust to the picture source, process-

ing in either “3:2” or “2:2” (Film Mode). It automatically

converts the source to the appropriate progressive signal

and reproduces the natural quality of the original picture.

When the “Film Mode” setting is set to “Auto”, the AV

receiver automatically detects the picture source and in

either “3:2” or “2:2”. However, there may be times when

you will get a better picture by setting “Film Mode” your-

self.

Note

• If the “Game Mode” setting is set to “On” (➔ 53), this setting

is fixed at “Video”.

■ Edge Enhancement

` 0 to +10

With this setting you can adjust the sharpness of edges in

the picture. “0” is the softest. “+10” is the sharpest.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR808 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info